NJM79L15UA-TE2 Nisshinbo

NJM79L00S 3-TERMINAL NEGATIVE VOLTAGE REGULTOR FEATURES DESCRIPTION Full Compatible with NJM79L00UA The NJM79L00S series negative voltage regulators deliver Output Current 100 mA up to 100 mA of output current. Output Voltage Accuracy V 4.0% O This series is enabling to direct replacement from Operating Temperature Ta = 40C to 125C NJM79L00UA series. High Ripple Rejection These devices offer improved usability by extending the Overcurrent Protection operating temperature and maximum input voltage. This Thermal Shutdown series is available in a SOT-89-3 package and is specified Bipolar Process over the industrial temperature range of 40C to 125C. Package SOT-89-3 APPLICATIONS TYPICAL APPLICATION Industrial Equipment OA Equipment V IN V V V IN OUT OUT Consumer Equipment 1.0 F 0.33 F NJM79L00S + An aluminum electrolysis capacitor is recommended as the output capacitor. COMMON EQUIVALENT CIRCUIT COMMON V OUT V IN Ver.1.0 - 1 - www.njr.com NJM79L00S PIN CONFIGURATIONS PIN FUNCTIONS PIN NO. SYMBOL DESCRIPTION 1 COMMON Common pin COMMON 1 2 V 2 V Input pin IN IN V 3 OUT 3 V Output pin OUT PRODUCT NAME INFORMATION NJM79L05S U3 (TE1) Package Taping Form Part Number U3: SOT-89-3 ORDERING INFORMATION OUTPUT HALOGEN- TERMINAL WEIGHT MOQ PRODUCT NAME PACKAGE RoHS MARKING VOLTAGE FREE FINISH (mg) (pcs) NJM79L05SU3 (TE1) 5.0 V SOT-89-3 Yes Yes Sn-2Bi 111 61 1000 NJM79L06SU3 (TE1) 6.0 V SOT-89-3 Yes Yes Sn-2Bi 121 61 1000 NJM79L08SU3 (TE1) 8.0 V SOT-89-3 Yes Yes Sn-2Bi 131 61 1000 NJM79L09SU3 (TE1) 9.0 V SOT-89-3 Yes Yes Sn-2Bi 141 61 1000 NJM79L12SU3 (TE1) 12 V SOT-89-3 Yes Yes Sn-2Bi 151 61 1000 NJM79L15SU3 (TE1) 15 V SOT-89-3 Yes Yes Sn-2Bi 161 61 1000 ABSOLUTE MAXIMUM RATINGS PARAMETER RATING UNIT SYMBOL Input Voltage V +0.3 to 40 V IN (1) Output Voltage V +0.3 to V (40) V OUT IN (2) (3) Power Dissipation (Ta = 25C) 2-Layer / 4-Layer P mW D SOT-89-3 580/ 2200 Junction Temperature Tj 40 to 150 C Operating Temperature T 40 to 125 C opr Storage Temperature T 50 to 150 C stg (1) Although the terminal rating is 40 V, the output voltage must not exceed the input voltage. (2) 2-Layer: Mounted on glass epoxy board (76.2 mm 114.3 mm 1.6 mm: based on EIA/JEDEC standard, 2-layer FR-4). (3) 4-Layer: Mounted on glass epoxy board (76.2 mm 114.3 mm 1.6 mm: based on EIA/JEDEC standard, 4-layer FR-4). (For 4-layer: Applying 74.2 mm 74.2 mm inner Cu area and a thermal via hole to a board based on JEDEC standard JESD51-5.) RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL VALUE UNIT Operating Voltage V V 2.0 to 30 V IN O Output Current I 0 to 100 mA O Ver.1.0 - 2 - www.njr.com