B07 Miniature Series 07 General Purpose Filter/Regulator 1/8 and 1/4 Port Sizes l Compact design l Full flow gauge ports l Low torque, non-rising adjusting knob l Snap action knob locks pressure setting when pushed in l Standard relieving models allow reduction of outlet pressure even when the system is dead-ended l Protects air operated devices by removing liquid and solids contaminants l Screw-on bowl reduces maintenance time l Can be disassembled without the use of tools or removal from the air line Technical Data Fluid: Compressed air Maximum pressure: Transparent bowl: 10 bar (150 psig) Ordering Information Metal bowl: 17 bar (250 psig) See Ordering Information on the following Operating temperature:* pages. Transparent bowl: -20 to +50C (0 to +125F) Metal bowl: -20 to +65C (0 to +150F) * Air supply must be dry enough to avoid ice formation at temperatures below +2C (+35F) Particle removal: 5 m or 40 m filter element Air quality: Within ISO 8573-1, Class 3 and Class 5 (particulates) Typical flow at 10 bar (100 psig) inlet pressure, 6,3 bar (90 psig) set ISO Symbols pressure and a droop of 1 bar (15 psig) from set: 3 1/8 Ports: 6,2 dm /s (13 scfm) with 5 m element 3 1/4 Ports: 6,5 dm /s (14 scfm) with 5 m element Nominal bowl size: 31 ml (1 fluid ounce) Gauge ports: 1/8 PTF with PTF main ports Automatic Drain Manual Drain 1/8 ISO Rc with ISO Rc main ports Relieving Relieving 1/8 ISO Rc with ISO G main ports Drain connection: 1/8 pipe Automatic drain operation: Spitter type drain operates momentarily when a rapid change in air flow occurs or when the supply pressure is reduced. Materials: Body: Zinc Automatic Drain Manual Drain Bonnet: Acetal Non Relieving Non Relieving Valve: Brass/nitrile Valve seat: Acetal Bowl: Transparent: Polycarbonate Metal: Zinc Element: Sintered polypropylene Elastomers: Nitrile Our policy is one of continuous research and development. 7/97 N/AL.8.300.300.01 We reserve the right to amend, without notice, the specifications given in this document.B07 Typical Performance Characteristics FLOW CHARACTERISTICS PORT SIZE: 1/4 ELEMENT: 40 m 8 INLET PRESSURE: 10 bar g (150 psig) RANGE 0,3 to 7 bar (5 to 100 psig) 100 6 80 60 4 40 2 20 0 0 3 02 4 6 810 dm /s 0 4 8 12 16 20 24 scfm AIR FLOW Ordering Information. Models listed include ISO G threads, transparent bowl, relieving diaphragm, automatic drain, 40 m element, 0,3 to 7 bar (5 to 100 psig) outlet pressure adjustment range* . 3 Port Size Model Number Flow dm /s (scfm) Weight kg (lbs) 3 G1/8 B07-101-A3KG 6,2 dm /s (13) 0,26 (0.57) 3 G1/4 B07-201-A3KG 6,5 dm /s (14) 0,26 (0.57) Typical flow with 7 bar (100 psig) inlet pressure, 6,3 bar (90 psig) set pressure and a 1 bar (15 psig) droop from set. Alternative Models H H H H H H H B 0 7 - - Threads Substitute Port Size Substitute PTF A 1/8 1 ISO Rc taper B 1/4 2 ISO G parallel G Bowl Relief Type Gauge Substitute Transparent Relieving Without 01 Outlet Pressure Adjustment Ranges* Substitute Transparent Non relieving Without 03 0.1 to 0.7 bar (1 to 10 psig) A Metal Relieving Without 33 0.3 to 3.5 bar (5 to 50 psig) E Metal Non relieving Without 35 0.3 to 7 bar (5 to 100 psig) K Metal Relieving Without 05** 0.3 to 10 bar (5 to 145 psig) M** Metal Non relieving Without 07** Element Substitute * Outlet pressure can be adjusted to pressures in excess of, 5 m 1 and less than, those specified. Do not use these units to 40 m 3 control pressures outside of the specified ranges. ** When specifying 10 bar (150 psig) unit, eg. B07-205-A3MG, Drain Substitute also note correct code at 5th and 6th digits. Automatic A Manual M Accessories Wall Mounting Bracket and Tamper Resistant 40 mm Panel Nut for P1H Unit Panel Nut Field Modification Pressure Gauge R1/8 Connection 1/8 PTF Connection Plastic: 18-025-003 Plastic: 2962-89 Knob and screw: 18-001-092 2 bar (30 psig): 18-013-214 Metal: 2962-04 Screw only: 6097-08 4 bar (60 psig): 18-013-990 18-013-211 10 bar (150 psig): 18-013-989 18-013-212 25 bar (350 psig): 18-013-908 Our policy is one of continuous research and development. N/AL.8.300.300.02 7/97 We reserve the right to amend, without notice, the specifications given in this document. OUTLET PRESSURE psig bar g