Guide rail with coding, grey Part no.: 64560-090 Features: Guide rail, plastic, one-piece, red, for 2 mm groove width Assembly Can be clipped into horizontal rails in Al extrusion Can be clipped into 1.5 mm thick plate Storage temperature: from -40 C ... 130 C With keying/coding block The optional ESD clip ensures conductive contact between PCB and horizontal rail, on both the solder side and the component side. The optional ESD clip for IEEE alignment pins can be fitted into guide rails with keying/coding and into the keying/coding block. It ensures conductive contact between the alignment pin of the insertion/extraction handle (IEL or IET handle) and the horizontal rail Optional keying/coding pegs to prevent boards being inserted into the wrong slot position Standard pack quantity 50 Technical information: Optional ESD clip for alignment pin Board Groove Material Finish Qty Description length width For CompactPCI, 1 PBT, VME64x with 160 2 piece UL 94 V- grey coding (mm) (mm) (SPQ 0 for 4 HP 50) wide application DimensionsDimensions table Accessories: Part Board height Dimensions Description no. Torx panhead screw L A2 w C D 24560- 2.5 9.3, zinc-plated, mm mm 141 Qty: 100 pieces mm mm mm Coding peg 160 149.39 135 120 150 20817- PC, UL 94 V-0, RAL 7035, 501 Qty: 100 pieces A2: length of rail B: Pitch of snap-in fixing 24560- ESD clip for guide rails 255 Qty: 50 pieces C: Pitch of guide rail retention screws D: Pitch of horizontal rail retention screws ESD clip for alignment pin of 24560- CPCI/VME64x handle 256 Qty: 50 pieces Note: Delivery is exclusively in standard pack quantity Optional screw fixing Product illustrations are exemplary illustrations and can deviate from supplied products.