A-P36L44

Mounting o ptions Pedestals and Pedestal a ccessories K77S66pec-330..0444228225..22621010 HMi - Hu Man-Mac Hine i nteraf ce Mounting o ptions p edealsts and p edeal st a ccessories pedestals Pedestals enable many types of enclosures and boxes to be floor mounted. Four columns and two bases are available. Columns can be mounted on either base, through the vertical column or directly to the enclosure. A cutout must be made in the enclosure if the wires are to come through the column. Columns have flanges at each end and a gasketed access plate. Screws, oil-resistant gaskets and box connector fitting are furnished with each column for joining an enclosure to the top of the column. Columns are 14 gauge steel with 10 gauge flanges. 18.00 x 18.00-in. (457 x 457-mm) base is .19-in. (5-mm) steel and 24.00 x 24.00-in. (610 x 610-mm) base is .25-in. (6-mm) steel. Both bases have leveling screws and holes for bolting to the floor. Finish on bases and columns is ANSI 61 gray polyester powder coating over pretreated surfaces. Bases and columns must be ordered separately. The user would normally remove the mounting brackets from the enclosure if the enclosure is mounted on a pedestal. Hoffman can supply enclosures without mounting brackets and with cutouts. Consult factory for more information. Bulletin: p 1 C D F H M N P S T Catalog Number AxBxC mm/in. Description mm/in. mm/in. mm/in. mm/in. mm/in. mm/in. mm/in. mm/in. mm/in. A44CCOL 889 x 102 x 102 Straight Pedestal Column 95 70 184 152 35.00 x 4.00 x 4.00 3.75 2.75 7.25 6.00 A44PBCOL 1041 x 102 x 102 Angled Pedestal Column 95 70 184 152 70 52 41.00 x 4.00 x 4.00 3.75 2.75 7.25 6.00 2.75 2.06 A66CCOL 889 x 152 x 152 Straight Pedestal Column 146 121 203 171 35.00 x 6.00 x 6.00 5.75 4.75 8.00 6.75 A66PBCOL 1041 x 152 x 152 Angled Pedestal Column 146 121 203 171 73 28 41.00 x 6.00 x 6.00 5.75 4.75 8.00 6.75 2.88 1.12 A18SBASE 457 x 457 Pedestal Base 457 25 16 18.00 x 18.00 18.00 1.00 .62 A24SBASE 610 x 610 Pedestal Base 610 28 17 24.00 x 24.00 24.00 1.12 .69 1 HMi - Hu Man-Mac Hine i nteraf ce SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION SOLUTIONS Spec-00485 KMounting o ptions Pedestals and Pedestal a ccessories pedestal wit H l egs Pedestal is available in two heights. Vertical tube has rigid one-piece D construction. Bottom of tube is AxBxC mm/in. Finish Description Catalog Number mm/in. open. Four sturdy, die-cast legs bolt AP26L44 660 x 102 x 102 ANSI 61 Steel 600 to vertical tube. Legs have holes 26.00 x 4.00 x 4.00 23.62 for bolting pedestal to the floor. AP26L44LG 660 x 102 x 102 RAL 7035 Steel 600 Legs will accept casters in limited 26.00 x 4.00 x 4.00 23.62 applications. Heavy-duty black AP36L44 914 x 102 x 102 ANSI 61 Steel 600 polymer caps fit on ends of legs to 36.00 x 4.00 x 4.00 23.62 AP36L44LG 914 x 102 x 102 RAL 7035 Steel 600 cover bolts or levelers. Pedestal has 36.00 x 4.00 x 4.00 23.62 ANSI 61 medium-gray or RAL 7035 AP26L88 660 x 203 x 203 ANSI 61 Steel 702 textured light-gray polyester powder 26.00 x 8.00 x 8.00 27.62 paint finish. Tapped mounting AP26L88LG 660 x 203 x 203 RAL 7035 Steel 702 holes in the top of pedestal allow 26.00 x 8.00 x 8.00 27.62 attachment to HMI base with cutout, AP36L88 914 x 203 x 203 ANSI 61 Steel 702 swivel, swivel tilt or angle adapter. 36.00 x 8.00 x 8.00 27.62 Hardware and gasket to attach AP36L88LG 914 x 203 x 203 RAL 7035 Steel 702 enclosure are included. 36.00 x 8.00 x 8.00 27.62 U se 4.00 x 4.00-in. (102 x 102-mm) pedestal with CONCEPT HMI and INLINE HMI Enclosures Use 8.00 x 8.00-in. (203 x 203- mm) pedestal with PROLINE Sloped-Front Enclosures Bulletin: p 1 87799590 pedestal Catalog Number Description CCPED Floor-mount pedestal or mount to swivel casters Mount pedestal to the floor or on accessory swivel casters. Coupling and base have RAL 7035 light-gray polyester powder paint finish. Anodized aluminum tube is 1000-mm high with a 45- x 60- mm tube cross section. The enclosure coupling has a 60- x 60-mm hole pattern. Bulletin: cc 3 EQUIPMENT PROTECTION SOLUTIONS PH 763.422.2211 FAX 763.422.2600 HOFFMANONLINE.COM HMi - Hu Man-Mac Hine i nteraf ce 2 Spec-00485 K