74HCT4515N

INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines 74HC/HCT4515 4-to-16 line decoder/demultiplexer with input latches inverting September 1993 Product specication File under Integrated Circuits, IC06Philips Semiconductors Product specication 4-to-16 line decoder/demultiplexer with 74HC/HCT4515 input latches inverting FEATURES The 74HC/HCT4515 are 4-to-16 line decoders/demultiplexers having four binary weighted Inverting outputs address inputs (A to A ) with latches, a latch enable input 0 3 Output capability: standard (LE), and an active LOW enable input (E). The 16 inverting outputs (Q to Q ) are mutually exclusive active LOW. 0 15 I category: MSI CC When LE is HIGH, the selected output is determined by the data on A . When LE goes LOW, the last data present at n GENERAL DESCRIPTION A are stored in the latches and the outputs remain stable. n When E is LOW, the selected output, determined by the The 74HC/HCT4515 are high-speed Si-gate CMOS contents of the latch, is LOW. When E is HIGH, all outputs devices and are pin compatible with 4515 of the 4000B are HIGH. The enable input (E) does not affect the state of series. They are specified in compliance with JEDEC the latch. standard no. 7A. When the 4515 is used as a demultiplexer, E is the data input and A to A are the address inputs. 0 3 QUICK REFERENCE DATA GND = 0 V T =25 C t =t = 6 ns amb r f TYPICAL SYMBOL PARAMETER CONDITIONS UNIT HC HCT t / t propagation delay A to Q C = 15 pF V =5 V 25 26 ns PHL PLH n n L CC C input capacitance 3.5 3.5 pF I C power dissipation capacitance per package notes 1 and 2 44 46 pF PD Notes 1. C is used to determine the dynamic power dissipation (P in W): PD D 2 2 P =C V f + (C V f ) where: D PD CC i L CC o f = input frequency in MHz i f = output frequency in MHz o 2 (C V f ) = sum of outputs L CC o C = output load capacitance in pF L V = supply voltage in V CC 2. For HC the condition is V = GND to V I CC For HCT the condition is V = GND to V - 1.5 V I CC ORDERING INFORMATION See 74HC/HCT/HCU/HCMOS Logic Package Information. September 1993 2