LS1028AXE7PQA

Converged industrial networking for Industry 4.0 Layerscape LS1028A Family of Industrial Applications Processors Designed to enable the industrial IoT, the LS1028A family of industrial application processors integrate 3D graphics, TSN-enabled Ethernet networking, and high-performance PCIe Gen 3.0 interfaces. OVERVIEW TSN FOR CONVERGED NETWORKS IN THE INDUSTRIAL IoT Support for 125 C junction temperature, NXPs commitment to To make the Industrial IoT and Industry 4.0 a reality, production for a minimum of 15 years, and industrial qualification manufacturers must interconnect operations technology (OT), makes this SoC family ideal for industrial applications that require such as manufacturing and automation systems, to their reliability and long life in challenging environments. information technology (IT), including inventory, logistics, and customer relationship management systems. Enabling the TARGET APPLICATIONS flow of information between these two domains will increase Control and factory automation robotics controllers, efficiency and reduce product delivery times. I/O controllers, motion controllers Time-sensitive networking (TSN) enables the convergence of the IT and OT, using gigabit Ethernet to enable high Transportation Gateways, HMI, embedded controllers bandwidth and legacy IT equipment, but adding features for mass transit and railways such as time-aware shaping, frame pre-emption, and frame IoT gateways replication and elimination to ensure the OT network Networking gateways requirements are met. The LS1028A can support daisy chain or ring deployments with its TSN capable switch, or endpoint Programmable logic controllers (PLCs) applications with the TSN capable Ethernet controller. Industrial PCs SECURITY Avionics The LS1028A family of SoCs can implement trusted platforms HIGHLY INTEGRATED DESIGN using features provided by Trust Architecture such as secure This family of SoCs integrates the high-performance boot, secure key storage, and tamper detection. The Security Arm Cortex -A72 processor, Ethernet switching with TSN, Engine (SEC) provides cryptographic acceleration for encrypted Trust Architecture with Security Engine, and a 3D GPU Ethernet communication and disk storage. The SEC also offloads with support for 4K display and integrated DisplayPort/ public/private key transactions, with support for elliptic-curve embedded DisplayPort interface. cryptography (ECC). INDUSTRIAL OPERATION FEATURE LIST FEATURES BENEFITS Fully qualified for industrial operation, Dual 64-bit Arm v8 Cortex -A72 Cores with NEON High single-threaded floating point and integer performance for the LS1028A family is designed and tested SIMD and floating point unit control applications to run continuously in high-temperature 4 Switched TSN-enabled Ethernet interfaces Low latency, deterministic Ethernet communications for OT and environments for 10 years. Devices IT systems, deployed in daisy-chain, ring, or star topologies 10/100/1000/2500 Mbit/s are available for extended temperature 1 TSN-enabled Ethernet Interface TSN endpoint capabilities for control applications, with scalable operation supporting a junction bandwidth 10/100/1000/2500 Mbit/s temperature between -40 and 105 C, 1 Ethernet Interface 10/100/1000 Mbit/s Low-power Ethernet for IT or console communications and are also available with support for Integrated 3D GPU, 4K LCD Controller, DP/eDP Phy High-resolution graphics for human machine interfaces junction temperatures up to 125 C. Secure key storage, use secure boot to create a trusted platform Trust Architecture for industrial IoT applications ENABLEMENT FOR FACTORY Cryptographic and public key hardware accelerators offload Security Engine with Cryptographic Offload AUTOMATION math-intensive operations from the CPU Open Industrial Linux provides real-time 2 x PCIe Gen 3.0 controllers, up to four SerDes lanes High-bandwidth, low-latency communication to host processors, running at 8 GHz root, complex and endpoint support industrial communication ICs, and Wi-Fi chipsets for gateways processing performance on the LS1028A High-speed USB allows interconnection to many different 2 x USB 3.0 interfaces with integrated PHY with support for bare-metal applications or peripheral devices, and the integrated PHY removes additional host and device mode support components from the design Xenomai Linux with an RTOS co-kernel. Flexible interconnect to support SATA 3.0, PCIe 3.0, 1 Gb and Open Industrial Linux also provides protocol 4 x 10 GHz SerDes lanes 2.5 Gb Ethernet support for Time-Sensitive Networking and synchronization with IEEE 1588. LS1028A SOC FAMILY SCALABLE PROCESSING WITH GRAPHICS PRODUCT LONGEVITY FEATURES LS1028A LS1027A LS1018A LS1017A The LS1028A is part of the NXP 15-year Arm core 2 x Cortex -A72 2 x Cortex-A72 1 x Cortex-A72 1 x Cortex-A72 product longevity program, ensuring 32-bit/16-bit DDR3L/ 32-bit/16-bit DDR3L/ 32-bit/16-bit DDR3L/ 32-bit/16-bit DDR3L/ DDR DDR4 + ECC DDR4 + ECC DDR4 + ECC DDR4 + ECC a stable supply of the LS1028A for long life industrial designs. Visit GPU 1 x GC7000UltraLite - 1 x GC7000UltraLite - www.nxp.com/productlongevity 4 x 2.5 G/1 G switched 4 x 2.5 G/1 G switched 4 x 2.5 G/1 G switched 4 x 2.5 G/1 G switched Eth (TSN enabled) Eth (TSN enabled) Eth (TSN enabled) Eth (TSN enabled) for details. Ethernet 1 x 2.5 G/1 G Eth 1 x 2.5 G/1 G Eth 1 x 2.5 G/1 G Eth 1 x 2.5 G/1 G Eth (TSN enabled) (TSN enabled) (TSN enabled) (TSN enabled) DEVELOPMENT PLATFORM 1 x 1 G Eth 1 x 1 G Eth 1 x 1 G Eth 1 x 1 G Eth 2 x Gen 3.0 Controllers 2 x Gen 3.0 Controllers 2 x Gen 3.0 Controllers 2 x Gen 3.0 Controllers The LS1028A reference design board PCIe (RC or EP) (RC or EP) (RC or EP) (RC or EP) (RDB) provides the ability to evaluate 2 x USB 3.0 with PHY 2 x USB 3.0 with PHY 2 x USB 3.0 with PHY 2 x USB 3.0 with PHY USB the capabilities of the LS1028A family (Host or Device) (Host or Device) (Host or Device) (Host or Device) of SoCs and get a jump-start on your LS1028A: DUAL Arm CORTEX A72 PROCESSOR BLOCK DIAGRAM embedded design. Contact your NXP LAYERSCAPE LS1028A BLOCK DIAGRAM sales representative for details. Security Core Complex Memory Controller RELATED SOFTWARE Security Engine Arm TrustZone Arm Arm Cortex A72 Cortex A72 Linux SDK for Layerscape Processors Secure Boot 16/32-bit DDR3L/4 48 KB L1-I 48 KB L1-I Memory Controller (w/ ECC) Power Management Open Industrial Linux SDK with support 32 KB L1-D (w/ ECC) 32 KB L1-D (w/ ECC) Standard Interfaces for real-time applications 1 MB L2 - Cache (w/ ECC) 2 x SD/SDIO/eMMC 3 x SPI Coherent Interconnect (CCI-400) CodeWarrior Development Software 2 x UART, 6 x LPUART Accelerators and Memory High Speed Interfaces Networking Elements 2 for Arm v8 64-bit based Layerscape 8 x I C, GPIO 6 x SAI, 2 x CAN-FD 2.5 GbE 256 KB On-Chip SRAM SATA 3 series processors FlexSPI 2.5 GbE PCIe 3.0 8 x Flex Timer 2.5 GbE USB 3.0 Uboot w/ PHY 2.5 GbE 3D GPU Multimedia Interfaces PCIe 3.0 2.5 TSN GbE UEFI EDP/DP PHY USB 3.0 4K LCD Controller w/ PHY 1 GbE To learn more, visit nxp.com/LS1028A NXP, the NXP logo, CodeWarrior, Layerscape and QorIQ are trademarks of NXP B.V. All other product or service names are the property of their respective owners. Arm, Cortex, TrustZone and NEON are trademarks or registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere. The related technology may be protected by any or all of patents, copyrights, designs and trade secrets. All rights reserved. 2018 NXP B.V. Document Number: LS1028AFS REV 0 Date of Release: December 2018 TSN Switch