Freescale Semiconductor, Inc. Document Number: WPR1516 Data Sheet: Technical Data Rev 2, 1/2015 MWPR1516 16 KB Flash MWPR1516CFM(R) 24 MHz Cortex-M0+ Based Microcontroller MWPR1516CALR Higher integration receiver controller MCU for wireless power transfer application. Targeting battery powered products are smart phone, tablet, portable medical devices, power tools etc. This product offers: AC/DC conversion and modulation/demodulation circuit for bi-directional communication to support industrial standards 32-pin QFN (FM) 36-pin WLCSP (AL) with foreign object detection (FOD) 5 x 5 x 0.58 Pitch 0.5 3.1 x 3.0 x 0.6 Pitch 0.4 USB/adapter power switcher to charge products with wire mm mm and wireless with priority. Up to 15 W with proper external transistors QFN package for industrial application and WLCSP package for space constrained consumer applications Performance Human-machine interface 24 MHz ARM Cortex -M0+ core One interrupt module (IRQ) Single cycle 32-bit x 32-bit multiplier Up to 13 general-purpose input/output (GPIO) Memories and memory interfaces Communication interfaces 16 KB program flash memory One UART module 4 KB SRAM One I2C module System peripherals Analog Modules LDO provides 5 V and 3 A output to down system One 12-bit analog-to-digital converters (ADC) with CNC controls the communication and provides AC up to 4 external channels protection One programmable gain amplifier (PGA) with High voltage input PMC module with three power differential input and output modes: Run, Wait, Stop One analog comparator (ACMP) containing a 6-bit LVR with reset or interrupt, selectable trip points DAC and programmable reference input WDOG with independent clock source Serial wire debug interface Timers Two 2-channel FTMs with basic TPM function Clocks One periodic interrupt timers (PIT) 32.768 kHz or 4 MHz to 24 MHz crystal oscillator One FSK demodulation timer (FSKDT) Internal 20 kHz low-power oscillator (LPO) System tick timer (SysTick) Internal clock source (ICS) One real time clock (RTC) Internal FLL with internal or external reference, precision trimming Security and integrity modules 80-bit unique identification number per chip Operating Characteristics Input from rectifier voltage range: 3.5 to 20 V Temperature range (ambient): -40 to 85C Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. 20142015 Freescale Semiconductor, Inc. All rights reserved.Ordering Information 1 Part Number Memory Maximum number of I O s Flash (KB) SRAM (KB) MWPR1516CFM(R) 16 4 13 MWPR1516CALR 16 4 13 1. To confirm current availability of ordererable part numbers, go to