PCF85133U/2DA/1Z

PCF85133 Universal LCD driver for low multiplex rates Rev. 3 4 July 2014 Product data sheet 1. General description The PCF85133 is a peripheral device which interfaces to almost any Liquid Crystal 1 Display (LCD) with low multiplex rates. It generates the drive signals for any static or multiplexed LCD containing up to four backplanes and up to 80 segments and can easily be cascaded for larger LCD applications. The PCF85133 is compatible with most 2 microcontrollers and communicates via the two-line bidirectional I C-bus. Communication overheads are minimized by a display RAM with auto-incremental addressing, by hardware subaddressing and by display memory switching (static and duplex drive modes). For a selection of NXP LCD segment drivers, see Table 27 on page 45. 2. Features and benefits Single-chip LCD controller and driver Selectable backplane drive configuration: static or 2, 3, or 4 backplane multiplexing 1 1 Selectable display bias configuration: static, ,or 2 3 Selectable frame frequency: 82 Hz or 110 Hz Internal LCD bias generation with voltage-follower buffers 80 segment drives: Up to 40 7-segment numeric characters Up to 20 14-segment alphanumeric characters Any graphics of up to 320 elements 80 4 bit RAM for display data storage Auto-incremental display data loading across device subaddress boundaries Display memory bank switching in static and duplex drive modes Versatile blinking modes Independent supplies possible for LCD and logic voltages Wide power supply range: from 1.8 V to 5.5 V Wide logic LCD supply range: From 2.5 V for low-threshold LCDs Up to 6.5 V for guest-host LCDs and high-threshold twisted nematic LCDs Low power consumption 2 400 kHz I C-bus interface May be cascaded for large LCD applications (up to 5120 elements possible) May be cascaded with PCF8532 to gain more flexibility in the number of addressable segments 1. The definition of the abbreviations and acronyms used in this data sheet can be found in Section 19.PCF85133 NXP Semiconductors Universal LCD driver for low multiplex rates No external components required Compatible with Chip-On-Glass (COG) technology Manufactured using silicon gate CMOS process 3. Ordering information Table 1. Ordering information Type number Package Name Description Version PCF85133U bare die 110 bumps 4.16 1.07 0.38 PCF85133 3.1 Ordering options Table 2. Ordering options 1 Product type number Orderable part number Sales item Delivery form IC (12NC) revision PCF85133U/2DA/1 PCF85133U/2DA/1Z 935288104033 chip with bumps in tray 1 1 Bump hardness, see Table 24 on page 42. 4. Marking Table 3. Marking codes Type number Marking code PCF85133U/2DA/1 PC85133-1 PCF85133 All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2014. All rights reserved. Product data sheet Rev. 3 4 July 2014 2 of 53