PESD24VS1ULD Unidirectional ESD protection diode Rev. 1 19 October 2010 Product data sheet 1. Product profile 1.1 General description Unidirectional ElectroStatic Discharge (ESD) protection diode designed to protect one signal line from the damage caused by ESD and other transients. The device is housed in a SOD882D leadless ultra small Surface-Mounted Device (SMD) plastic package with visible and solderable side pads. 1.2 Features and benefits ESD protection of one line ESD protection up to 23 kV Ultra small SMD plastic package IEC 61000-4-2 level 4 (ESD) Solderable side pads IEC 61000-4-5 (surge) I =3A PP Package height typ. 0.37 mm Max. peak pulse power: P =150 W PP Low clamping voltage: V =70V Ultra low leakage current: I <1nA CL RM AEC-Q101 qualified 1.3 Applications Computers and peripherals Communication systems Audio and video equipment Portable electronics 1.4 Quick reference data Table 1. Quick reference data T =25 C unless otherwise specified. amb Symbol Parameter Conditions Min Typ Max Unit V reverse standoff voltage - - 24.0 V RWM C diode capacitance f = 1 MHz V = 0 V - 23 50 pF d RPESD24VS1ULD NXP Semiconductors Unidirectional ESD protection diode 2. Pinning information Table 2. Pinning Pin Description Simplified outline Graphic symbol 1 1 cathode 2 anode 2 1 1 2 006aaa152 Transparent top view 1 The marking bar indicates the cathode. 3. Ordering information Table 3. Ordering information Type number Package Name Description Version PESD24VS1ULD - leadless ultra small plastic package 2 terminals SOD882D body 1.0 0.6 0.4 mm 4. Marking Table 4. Marking codes 1 Type number Marking code PESD24VS1ULD 0010 0000 1 For SOD882D binary marking code description, see Figure 1. 4.1 Binary marking code description CATHODE BAR READING DIRECTION VENDOR CODE READING EXAMPLE: 0111 1011 MARKING CODE (EXAMPLE) READING DIRECTION 006aac477 Fig 1. SOD882D binary marking code description PESD24VS1ULD All information provided in this document is subject to legal disclaimers. NXP B.V. 2010. All rights reserved. Product data sheet Rev. 1 19 October 2010 2 of 12