PTN5100D USB Type-C power delivery PHY and protocol IC Rev. 1 2 August 2016 Product data sheet 1. General description PTN5100D is a single port USB Type-C Power Delivery (PD) PHY and Protocol IC that provides Type-C Configuration channel interface and USB PD Physical and Protocol layer functions to a System PD Port Policy Controller (Policy Engine and Device Policy Manager, Alternate mode controller). It complies with USB PD 1 and Type-C 2 specifications. PTN5100D is architected to deliver robust performance, compliant behavior, configurability and system implementation flexibility that are essential to tide over interoperability and compliance hurdles in the platform applications. PTN5100D can support system realization of the following PD roles: (i) Consumer only (ii) Consumer/Provider. Further, it is register programmed to operate in Type-C specific Upstream Facing Port (UFP). It can work along with the PD policy controller to operate in other modes (DFP, DRP). PTN5100D operates from platform power supply VDD, or it can also be powered from USB power VBUS directly. The host interface operates on VIO supply to facilitate interfacing to systems that use IO supply rail different from VDD supply rail. It provides SPI/I2C interface for system host control/status update. The interface choice is pre-configured in NXP factory. PTN5100D is available in a small footprint package option: HVQFN20 4 mm x 4 mm, 0.5 mm pitch. 2. Features and benefits 2.1 USB PD and Type-C Features Complies with USB PD 1 and USB Type-C 2 specifications. Supports implementation of various system PD roles: Consumer, Consumer/Provider Supports Type-C role configurability Type-C role (UFP, DFP) Implements UFP role pull down behavior to handle dead battery condition on battery powered platforms Implements Rd indication on CC pin Cooperatively works under the control of Policy controller MCU for power delivery negotiation and contract(s), Alternate mode and VDM exchanges Implements BMC (de)coding, 4B5B symbol (de)coding, CRC generation/checking, PD packet assembling/disassembling including Preamble, SOP, EOP, Good CRC response, Retries, Hard and Cable resets PD PHY and Protocol layer interface control and status update handled via SPI/I2C interfacePTN5100D NXP Semiconductors USB Type-C power delivery PHY and protocol IC DRP and DFP roles can be supported 2.2 System protection features Back current protection on all pins when PTN5100D is unpowered CC1 and CC2 pins are 5.5 V tolerant VBUS pin and VBUS power path MOSFET enable pins are 28 V tolerant 2.3 General Delivers (active LOW enable) gate control signals for PMOS Power MOSFETs on VBUS source and sink power paths Provides dedicated IO pin (CC ORIENT) for indicating Cable/plug orientation Delivers up to 30 mA (max) for powering Policy controller MCU Supports SPI slave interface (SPI modes 1 and 2 supported) up to 30 MHz Supports I2C slave interface standard mode (100 kHz), Fast mode (400 kHz) and Fast mode plus (1 MHz) I2C Device slave address programmable up to 3 values 2 Supports 3.3 V or 1.8 V capable I C-bus or SPI interface Supports register access - device configuration, control and status/interrupt 2 interfacing through Slave I C-bus interface Power supplies - VDD (3.3 V 10 %) or VBUS Tolerant up to 28 V on VBUS and operational up to maximum of 25 V on VBUS Operating temperature 20 C to 85 C ESD 8 kV HBM, 1 kV CDM Package: HVQFN20 4 mm 4 mm, 0.5 mm pitch. 3. Applications PC accessories/peripherals: Docking, Mobile Monitors, Multi-Function Monitors, Portable/External hard drives, Dongles and accessories, etc. 4. Ordering information Table 1. Ordering information Type number Topside Package marking Name Description Version PTN5100DBS 51D0 HVQFN20 plastic thermal enhanced very thin quad flat package SOT917-4 2 no leads 20 terminals body 4 4 0.85 mm PTN5100DABS 51DA HVQFN20 plastic thermal enhanced very thin quad flat package SOT917-4 3 no leads 20 terminals body 4 4 0.85 mm 1 Total height after printed-circuit board mounting <=1 mm (maximum) 2 Supported system interface - SPI 2 3 Supported system interface - I C PTN5100D All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2016. All rights reserved. Product data sheet Rev. 1 2 August 2016 2 of 37