SA606DK/01,118 NXP

SA606 Low-voltage high performance mixer FM IF system Rev. 6 8 November 2013 Product data sheet 1. General description The SA606 is a low-voltage high performance monolithic FM IF system incorporating a mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector, logarithmic Received Signal Strength Indicator (RSSI), voltage regulator and audio and RSSI op amps. The SA606 is available in SO20 and SSOP20 packages. The SA606 was designed for portable communication applications and will function down to 2.7 V. The RF section is similar to the famous SA605. The audio and RSSI outputs have amplifiers with access to the feedback path. This enables the designer to adjust the output levels or add filtering. 2. Features and benefits Low power consumption: 3.5 mA typical at 3 V Mixer input to >150 MHz Mixer conversion power gain of 17 dB at 45 MHz XTAL oscillator effective to 150 MHz (LC oscillator or external oscillator can be used at higher frequencies) 102 dB of IF amp/limiter gain 2 MHz IF amp/limiter small signal bandwidth Temperature compensated logarithmic RSSI with a 90 dB dynamic range Low external component count suitable for crystal/ceramic/LC filters Excellent sensitivity: 0.31 V into 50 matching network for 12 dB SINAD (Signal-to-Noise-and-Distortion ratio) for 1 kHz tone with RF at 45 MHz and IF at 455 kHz SA606 meets cellular radio specifications Audio output internal op amp RSSI output internal op amp Internal op amps with rail-to-rail outputs ESD protection exceeds 2000 V HBM per JESD22-A114 and 1000 V CDM per JESD22-C101 Latch-up testing is done to JEDEC Standard JESD78 Class II, Level B 3. Applications Portable cellular radio FM IF Cordless phones Wireless systems RF level meterSA606 NXP Semiconductors Low-voltage high performance mixer FM IF system Spectrum analyzer Instrumentation FSK and ASK data receivers Log amps Portable high performance communication receiver Single conversion VHF receivers 4. Ordering information Table 1. Ordering information T = 40 C to +85 C amb Type number Topside Package mark Name Description Version SA606D/01 SA606D SO20 plastic small outline package 20 leads body width 7.5 mm SOT163-1 SA606DK/01 SA606DK SSOP20 plastic shrink small outline package 20 leads SOT266-1 body width 4.4 mm SA606DK/02 SA606DK SSOP20 plastic shrink small outline package 20 leads SOT266-1 body width 4.4 mm SA606DK/03 SA606DK SSOP20 plastic shrink small outline package 20 leads SOT266-1 body width 4.4 mm 4.1 Ordering options Table 2. Ordering options Type number Orderable Package Packing method Minimum Temperature part number order quantity SA606D/01 SA606D/01,112 SO20 Standard marking 1520 T = 40 Cto+85 C amb *ICs tube - DSC bulk pack SA606D/01,118 SO20 Reel 13 Q1/T1 2000 T = 40 Cto+85 C amb *Standard mark SMD SA606DK/01 SA606DK/01,112 SSOP20 Standard marking 1350 T = 40 Cto+85 C amb *ICs tube - DSC bulk pack SA606DK/01,118 SSOP20 Reel 13 Q1/T1 2500 T = 40 Cto+85 C amb *Standard mark SMD SA606DK/02 SA606DK/02,118 SSOP20 Reel 13 Q1/T1 2500 T = 40 Cto+85 C amb *Standard mark SMD SA606DK/03 SA606DK/03,118 SSOP20 Reel 13 Q1/T1 2500 T = 40 Cto+85 C amb *Standard mark SMD SA606 All information provided in this document is subject to legal disclaimers. NXP B.V. 2013. All rights reserved. Product data sheet Rev. 6 8 November 2013 2 of 33