SSL2102T/N1,518 NXP

SSL2102 Dimmable Greenchip driver for LED lighting Rev. 1.1 2 December 2011 Product data sheet 1. General description The SSL2102 is a Switched Mode Power Supply (SMPS) driver IC that operates in combination with a phase cut dimmer directly from rectified mains. It is designed to drive LED devices. The device includes a high-voltage power switch, a circuit to allow direct start-up from the rectified mains voltage and a high-voltage circuitry to supply the phase cut dimmer. For dimmer applications, an integrated dedicated circuitry optimizes the dimming curve. SSL2101: fully integrated LED driver for lamps up to 10 W SSL2102: fully integrated LED driver for lamps up to 25 W SSL2103: gives the application designer flexibility to: Use an external power switch to allow the IC to provide any power Use external bleeder transistors to provide extended dimmer interoperability 2. Features and benefits Easy migration to existing lighting control infrastructure Supports most available dimming solutions Optimized efficiency with valley switching managed by a built-in circuitry Demagnetization detection OverTemperature Protection (OTP) Short-Winding Protection (SWP) and Over Current Protection (OCP) Internal V generation allowing start-up from the rectified mains voltage CC Natural dimming curve by logarithmic correction, down to 1 % Limited external components required because of the high integration level Thermal enhanced SO20 wide body package Suitable for flyback and buck applications 3. Applications SSL applications below 25 W SSL retro-fit lamps (for example: GU10, E27) LED modules such as LED spots and down-lights LED strings suitable for retail displays, etc.SSL2102 NXP Semiconductors Dimmable Greenchip driver for LED lighting 4. Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit R drain-source on-state power switch I = 0.50 A DSon SOURCE resistance T =25 C 4.5 6.5 7.5 j I = 0.20 A SOURCE T =125 C-9.510 j V supply voltage 8.5 - 40 V CC f oscillator frequency 10 100 200 kHz osc I current on pin DRAIN V >60V -- 2.2 mA DRAIN DRAIN no auxiliary supply V >60V - 30 125 A DRAIN with auxiliary supply V voltage on pin DRAIN 40 - 600 V DRAIN minimum duty factor - 0 - % min maximum duty cycle - 75 - % max T ambient temperature 40 - +100 C amb 5. Ordering information Table 2. Ordering information Type number Package Name Description Version SSL2102T SO20 plastic small outline package 20 leads body width 7.5 mm SOT163-1 SSL2102 All information provided in this document is subject to legal disclaimers. NXP B.V. 2011. All rights reserved. Product data sheet Rev. 1.1 2 December 2011 2 of 22