Product Information

TDA8026ET/C2,551

TDA8026ET/C2,551 electronic component of NXP

Datasheet
Interface - Specialized IC SMART CARD SLOT

Manufacturer: NXP
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 5.612 ea
Line Total: USD 5.61

601 - Global Stock
Ships to you between
Mon. 13 May to Wed. 15 May
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
601 - WHS 1


Ships to you between Mon. 13 May to Wed. 15 May

MOQ : 1
Multiples : 1
1 : USD 5.566
10 : USD 5.1865
25 : USD 4.6
416 : USD 4.5655
832 : USD 3.749

     
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Operating Supply Voltage
Operating Supply Current
Minimum Operating Temperature
Maximum Operating Temperature
Mounting Style
Package / Case
Packaging
Supply Current
Brand
Maximum Power Dissipation
Product Type
Factory Pack Quantity :
Interface Type
Cnhts
Hts Code
Mxhts
Pd - Power Dissipation
Subcategory
Taric
Category
Brand Category
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
TDA8029HL/C207,118 electronic component of NXP TDA8029HL/C207,118

I/O Controller Interface IC SMART CARD READER
Stock : 0

TDA8034AT/C1 electronic component of NXP TDA8034AT/C1

Interface - Specialised TDA8034AT/SO16//C1/REEL 13 Q1/T1 *STANDARD MARK S
Stock : 0

TDA8034AT/C1,118 electronic component of NXP TDA8034AT/C1,118

Interface - Specialized SMART CARD INTERFACE
Stock : 0

TDA8034HN/C1,151 electronic component of NXP TDA8034HN/C1,151

Interface - Specialized SMART CARD INTERFACE
Stock : 0

TDA8029HLC207,151 electronic component of NXP TDA8029HLC207,151

NXP Semiconductors IO Controller Interface IC IOCTRL 5V 0.25A 0.5W
Stock : 0

TDA8029HLC207 electronic component of NXP TDA8029HLC207

20MHzSmart Card Interface 3.3V/5V 32-Pin LQFP
Stock : 0

TDA8034AT/C1,112 electronic component of NXP TDA8034AT/C1,112

Interface - Specialised SMART CARD INTERFACE
Stock : 991

TDA8034HN/C1,118 electronic component of NXP TDA8034HN/C1,118

Interface - Specialised SMART CARD INTERFACE
Stock : 8865

TDA8026ET/C3E electronic component of NXP TDA8026ET/C3E

Interface - Specialised Multiple smart card slot interface
Stock : 0

Image Description
PCA9546APWR electronic component of Texas Instruments PCA9546APWR

Multiplexer Switch ICs 4-Ch I2C & SMBus Multiplexer
Stock : 1865

Hot PCA9548APW,118 electronic component of NXP PCA9548APW,118

Multiplexer Switch ICs 8-CH I2C SWITCH W/RESET
Stock : 12285

CM2020-00TR electronic component of ON Semiconductor CM2020-00TR

ESD Suppressors HDMI Port P/I Device Transmitter
Stock : 0

ADV3003ACPZ electronic component of Analog Devices ADV3003ACPZ

Equalisers Front Panel HDMI Buffer - TMDS Only
Stock : 0

MAX3814CHJ+ electronic component of Analog Devices MAX3814CHJ+

Equalisers DVI/HDMI TMDS Fr-4 And Cable Equalizer/Driver
Stock : 0

TDA8035HN/C1/S1J electronic component of NXP TDA8035HN/C1/S1J

Interface - Specialized Smart card interface
Stock : 0

MC33978AES electronic component of NXP MC33978AES

Interface - Specialized Switch Detection Interface, 22-switches, 3.3 V / 5.0 V SPI , QFN32
Stock : 0

AD8192ACPZ-RL7 electronic component of Analog Devices AD8192ACPZ-RL7

Equalisers Auziliary Mux 2:1 HDMI/DVI Switching
Stock : 0

TC358779XBG(NOK) electronic component of Toshiba TC358779XBG(NOK)

Interface - Specialised HDMI 1.4b MIPI DSI 1.1 Interface Bridge
Stock : 0

TDA8026 Multiple smart card slot interface IC Rev. 1.1 30 June 2016 Product data sheet 1. General description The TDA8026 is a cost-effective, analog interface for addressing multiple smart card slots in a Point Of Sales (POS) terminal. It can address up to two main cards (synchronous or asynchronous smart cards supported) and up to four Security Access Modules (SAMs). Its packaging supports the latest payment terminal security requirements. 2. Features and benefits 2 I C-bus controlled IC card interface in a TFBGA64 package Supply voltage between 2.7 V and 5.5 V Dedicated microcontroller interface supply voltage (V ) DD(INTF) Shutdown mode ensures very low power consumption when the TDA8026 is inactive Programmable power reduction modes triggered when the card slots are inactive V generation via DC-to-DC converter: two card slots can be fully loaded, the three CC(n) others in reduced consumption mode Two clock input pins: CLKIN1 for card slot 1 and CLKIN2 for card slots 2 to 5 Two transparent I/O lines on microcontroller side, one for card slot 1 and the other for card slots 2 to 5 Five protected, half-duplex, bidirectional, buffered I/O lines with current limitation at 15 mA and a maximum frequency 1 MHz 2 Two I C-bus controlled auxiliary I/O lines V regulation on all card slots at I 55 mA: CC(n) CC 5 V, 3 V or 1.8 V 5 % Current spikes of 40 nAs up to 20 MHz for 5 V cards with controlled rise and fall times Current limitation of approximately 100 mA Thermal protection and short-circuit protection on all card contacts Automatic activation and deactivation sequences initiated by the software or hardware in the event of a short-circuit, card take-off or voltage drop-out for V , V or V DD(INTF) DD UP Enhanced ElectroStatic Discharge (ESD) protection on the card-side up to 6 kV 20 MHz clock input Card clock generation up to 20 MHz and dividable by 1, 2, 4 or 5 with synchronous frequency changes: Stop, HIGH or LOW Clock frequency between 1 MHz and 2.2 MHz in card low-power mode Current limitation on pin CLK (n)TDA8026 NXP Semiconductors Multiple smart card slot interface IC RST signal lines with current limitation at 20 mA, controlled by an embedded (n) programmable clock pulse counter on asynchronous cards or by a register on synchronous cards 1 ISO 7816-3 and EMV 4.3 payment systems compatibility V supply voltage supervisor ensures correct communication between DD(INTF) microcontroller and circuit threshold internally fixed or set using an external resistor bridge V supply voltage supervisor for spike suppression during power-on and emergency DD deactivation at power-off threshold internally fixed Card presence input with a 17.8 ms (typical) built-in debouncing system on card slots 1 and 2 One interrupt signal (IRQN) 3. Applications Point Of Sale terminals Multiple SAM contact readers 4. Quick reference data Table 1. Quick reference data V = V = 3.3 V f = 10 MHz GND = 0 V inductor = 10 H decoupling capacitors on pins V and V = 10 F DD DD(INTF) clk(ext) DD UP T = 25 C unless otherwise specified. amb Symbol Parameter Conditions Min Typ Max Unit Supply 1 V supply voltage on pin V DC-to-DC converter on 2.7 - 5.5 V DD DD 1 on pin V DC-to-DC converter off and 5.25 - 5.5 V DD V pin = 5 V CC(n) I supply current shutdown mode - 25 40 A DD Standby mode - 300 450 A clock-stop mode all card slots in this mode - 3.7 - mA f stopped on pins CLK pins CLKIN1 clk(ext) (n) and CLKIN2 either stopped, HIGH-level or LOW-level 2 active mode all V pins = 5 V f on - 210 260 mA CC(n) clk(ext) 3 pins CLK = 5 MHz I = I = 55 mA (n) CC(1) CC(2) I = I = I = 2 mA CC(3) CC(4) CC(5) V interface supply voltage on pin V 1.6 - 3.6 V DD(INTF) DD(INTF) I interface supply current shutdown mode - 10 15 A DD(INTF) active mode all V pins = 5 V f on - 35 - A CC(n) clk(ext) pins CLK = 5 MHz (n) 1. for C3 version TDA8026 1 All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2016. All rights reserved. Product data sheet Rev. 1.1 30 June 2016 2 of 61

Tariff Desc

8542.39.23 No ..Linear/analogue and peripheral integrated circuits, timers, voltage regulators, A/D and D/A converters, telecommunication and modem integrated circuits, other than board level products Free

Electronic integrated circuits- Processors and controllers, whether or not combined with memories, converters, logic circuits, amplifiers, clock and timing circuits, or other circuits
FR9
Freescale
FREESCALE SEMI
Freescale Semicon
FREESCALE SEMICONDUC
Freescale Semiconductor
Freescale Semiconductor - NXP
NXP
NXP Freescale
NXP (FREESCALE)
NXP / Freescale
NXP SEMI
NXP Semicon
NXP SEMICONDUCTOR
NXP Semiconductors
NXP USA Inc.
PH3
PHI

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted