TJA1102SHN/0Z NXP

TJA1102 100BASE-T1 dual/single PHY for automotive Ethernet Rev. 1 1 November 2017 Product short data sheet 1. General description The TJA1102 is a 100BASE-T1 compliant dual-port Ethernet PHY optimized for automotive use cases such as gateways, IP camera links, driver assistance systems and back-bone networks. The device provides 100 Mbit/s transmit and receive capability over two unshielded twisted-pair cables, supporting a cable length of up to at least 15 m. The TJA1102 has been designed for automotive robustness, while minimizing power consumption and system costs. For added flexibility, a single PHY version is available (TJA1102S) in which one of the PHYs is disabled. Forthefulldatasheetandapplicationhints,pleaseregisterwithDocStore at TJA1102 NXP Semiconductors 100BASE-T1 Dual PHY for Automotive Ethernet Local wake-up pin Wake-up via SMI-access 2.4 Diagnosis Real-time monitoring of link stability and transmitted data quality Diagnosis of cable errors (shorts and opens) Gap-free supply undervoltage detection with fail-silent behavior Internal, external and remote loopback modes for diagnosis 2.5 Miscellaneous Internal reverse MII mode for repeater operation On-chip regulators to provide 3.3 V single-supply operation Supports optional 1.8 V external supply for digital core On-chip termination resistors for the differential cable pair Jumbo frame support up to 16 kB 3. Ordering information Table 1. Ordering information Type number Package Name Description Version 1 TJA1102HN HVQFN56 plastic thermal enhanced very thin quad flat package no leads 56 SOT684-13 terminals body 8 8 0.85 mm 2 TJA1102SHN 1 Dual PHY. 2 Single PHY. TJA1102 SDS All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2017. All rights reserved. Product short data sheet Rev. 1 1 November 2017 2 of 19