A Series PulsEater Ceramic Composition Available in E12 Ohmic values The A Series non-inductive, ceramic composite resistors are designed for a variety of applications where high energy handling capabilities are crucial. *AZ style is provided with These resistors are ideal for any application which dual terminal wires is subject to surges, high peak power, or impulse energy. FEATuRES APPlICATIONS Their unique design allows uniform distribution High Surge Energy Motor Drives of energy throughout their structure which results in low thermal stress. The high-temperature, Non-Inductive Power Supplies, UPS solvent-resistant epoxy coating carries a UL94V0 Small Size Power Conversion flammability rating which is suitable for almost any In-Rush Current Limiting environment. SERIES SPECIFICATIONS P Impulse 1 2 3 4 Resistance avg. Voltage Energy Series (ohms) (watts) (volts) (joule) AV 3.3 to 10K 2.0 1000 250 AW 4.7 to 15K 2.5 1500 400 AX 1.0 to 3.3K 3.5 1000 700 AY 2.2 to 6.8K 4.5 2000 1400 AZ 1.5 to 4.7K 5.5 2500 2800 1 2 3 4 E12 Standard Values 10% Free Air 40C Ambient In Air Single Impulse ChARACTERITICS Bulk Ceramic Resistance Element Parameter Max. R Test Method Terminals Radial 100% Sn solder coated radial (60/40 sol- Life Test +5% MIL-STD-202F, method 108A. der available upon request) except 50C, 1000 hrs. rated power 1.5 hrs. ON, 0.5 hrs. OFF Coating UL94V0, solvent resistant epoxy Single Pulse 1.5% Single pulse, capacitor discharge Tolerance 10% Standard Energy at Rated Energy 350VDC for AW Operating Temp. -55C to 150C and AX sizes 650VDC for AY and Range AZ sizes. Derating Derates linearly from 100% 50C to 0% Repetitive HV 2.0% 10 joules 5.OKV, 10,000 cycles 150C Pulsing Temperature Rise 100C 100% rated power, 50C ambient Short-time 1.5% 10x rated power. 5 sec. ON, 5 Overload sec. OFF, 5 cycles Short-term High 1.5% 250C for 30 seconds Mounting clip Temp This saddle clip conforms to D Long-term High 2.0% 1000 hours 150C the configuration of Ohmites Temp A Series resistor to provide 2.0% MIL-STD-202F, method 107D. H secure mounting. Made Thermal Shock -55C to +125C, 5 cycles of a durable thermoplastic Cycle polyester, the saddle clip is Moisture 1.0% 90% to 95% rh 40C, 1000 hrs. L designed to secure the A Resistance Series in place while safely Dim. (mm) withstanding its operat- Part No. D H L for Series Color ing temperatures. Use (2) 5911E 20 23 13 AX and AY White saddle clips per resistor for extra stability. 5910E 25 26 15 AZ Black (continued) 52 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com A Series PulsEater Ceramic Composition Available in E12 Ohmic values dImENSIONS AV - AY AZ P L D H S Term. wire avg.2 max. max. max. norm. gauge Weight L L Series (watts) (mm) (mm) (mm) (mm) (AWG) (g) AV 2.0 15 13 22 12.5 20 3.9 D D AW 2.5 20 13 22 17.5 20 5.4 H AX 3.5 15 21 28 12.5 18 10 AY 4.5 25 21 28 22.5 18 19 16.7mm 4.7mm AZ 5.5 30 26 27 18 33 0.7mm S S 7.6mm Offset crimp width is 2x terminal wire gauge AZ series also available with crimps upon request ORdERINg INFORmATION RoHS compliant AW56G K E Size Tolerance Ohm Value Example: K=10% std. 33G = 3.3 Ohms M = 20% 330 = 33 Ohms 331 = 330 Ohms Standard Values Series Series Series Series Part No. Part No. Part No. Part No. Prefix Prefix Prefix Prefix Suffix Suffix Suffix Suffix 1.0 10GK 5.6 56GK 33 330K 220 221K 1.2 12GK 6.8 68GK 39 390K 270 271K 1.5 15GK 8.2 82GK 47 470K 330 331K 1.8 18GK 10 100K 56 560K 470 471K 2.2 22GK 12 120K 68 680K 560 561K 2.7 27GK 15 150K 82 820K 680 681K 3.3 33GK 18 180K 100 101K 820 821K 3.9 39GK 22 220K 120 121K 1000 102K 4.7 47GK 27 270K 150 151K 180 181K Check product availability at www.ohmite.com = Standard values Non-standard values subject to a minimum handling charge per item. 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 53 Ohmic value AV AW AX AY AZ Ohmic value AV AW AX AY AZ Ohmic value AV AW AX AY AZ Ohmic value AV AW AX AY AZ