AG-020 Ohmite

AG Series Single Phase EMI Filters These series range of General Purpose filters are designed to suppress undesirable electri- cal disturbances in Power Lines. They limit the amplitude of interfering voltages on AC power lines and prevent them from propagat- ing into or out of the filtered equipment. FeA tureS SerieS SpeciFicA tionS Rated Current up to 100A Rated Leakage Medical Version available current current (mA) Termination Weight High Conducted attenuation per formance Part No. @40C @250VAC/50Hz Tab Screw (kg) Chassis mounting AG-001 1A 0.34 6.3 x 0.8 0.06 AG-002 2A 0.34 6.3 x 0.8 0.06 ApplicA tionS AG-003 3A 0.34 6.3 x 0.8 0.06 AG-006 6A 0.34 6.3 x 0.8 0.06 Power Systems AG-010 10A 0.34 6.3 x 0.8 0.06 Electronic Equipment AG-015 15A 0.34 6.3 x 0.8 0.125 Frequency convertors AG-016 16A 0.34 6.3 x 0.8 0.125 AG-020 20A 0.34 6.3 x 0.8 0.260 Stepper motor drives AG-025 25A 0.73 M5 0.6 UPS/Inverters AG-030 30A 0.73 M5 0.6 AG-035 35A 0.73 M5 0.6 AG-040 40A 0.73 M5 0.6 AG-050 50A 0.73 M6 1 AG-060 60A* 0.73 M6 1 AG-075 75A* 0.73 M8 2 AG-080 80A* 0.73 M8 2 AG-100 100A* 0.73 M10 2 *Not covered under CSA chArActeriSticS Max. Cont. Oper. Voltage 250VAC Operating Frequency 50/60Hz Current ratings 1A to 100A @40C High Potential test voltage L to G 2120Vdc for 1 Minute; L to L 1414Vdc for 1 Minute Design Corresponding to UL 60939-3, CSA 22.2 No.8-13 and IEC 60939 Overload Capability 135% of Rated current for 15 minutes Flammability corresponding to UL 94 V-0 Temperature range -25C to +85C Climatic Category 25/85/21 Recommended Torque (Nm) M5: 1.0-2.0; M6: 1.25 2.5; M8: 2.5-5; M10: 3.5-7 (continued) 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info@ohmite.com 1AG Series Single Phase EMI Filters circuit diAGrAm L L L' Cy L L Cx E E I O R N A E D Cy N' N inSertion loSS -10 -10 -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 1A 10A -70 -70 2A 15/16A 3A 20A -80 -80 6A 25A -90 -90 Start 30.00kHz Stop 30.00MHz Start 30.00kHz Stop 30.00MHz -10 -10 -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 30A 60A -70 -70 35A 75A 40A 80A -80 -80 50A 100A -90 -90 Start 30.00kHz Stop 30.00MHz Start 30.00kHz Stop 30.00MHz (continued) 2 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info@ohmite.com