AHM-10 Ohmite

AHM Series Dual stage medical grade EMI Filter These series range of double stage filters with low leakage give superior performance when used in applications with low Impedance loads controlling pulsed, continuous and intermittent interference noise and where high levels Of mains borne interference are present. FeA tureS SerieS SpeciFicA tionS Double stage filter Rated Low Leakage Standard current Termination Weight Part No. 40C Tab Screw (g) Superior Per formance AHM-01 1A 6.3 x 0.8 125 Chassis mounting AHM-02 2A 6.3 x 0.8 125 AHM-03 3A 6.3 x 0.8 170 High conducted attenuation per formance AHM-06 6A 6.3 x 0.8 170 AHM-10 10A 6.3 x 0.8 170 ApplicA tionS AHM-15 15A 6.3 x 0.8 260 AHM-20 20A M5 650 Medical Equipment AHM-25 25A M5 650 Diagnostic Equipment AHM-30 30A M5 650 AHM-35 35A M5 1000 Low Leakage Applications AHM-40 40A M5 1000 X ray Machines AHM-50 50A M6 2000 MRI cHArActeriSticS Max. Cont. Oper. Voltage 250VAC Operating Frequency 50/60Hz 1A to 50A 40C Current ratings High Potential test voltage L to G 2120Vdc for 1 Minute L to L 1414Vdc for 1 Minute Design corresponding to UL 60939-3, CSA 22.2 No.8-13 and IEC 60939 Overload Capability 135% of Rated current for 15 min. Flammability corresponding to UL 94 V-0 -25C to +85C Temperature range Climatic Category 25/85/21 Recommended Torque (Nm) M5: 1.0-2.0 M6: 1.25 2.5 M8: 2.5-5 M10: 3.5-7 (continued) 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 1AHM Series Dual stage medical grade EMI Filter circuit diAgrAM LC1 LC2 L L L L Cx Cx E I O R N A E D N N inSertion loSS -10 -10 -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 1A 6A -70 -70 2A 10A 3A 15A -80 -80 -90 -90 Start 30.00kHz Stop 30.00MHz Start 30.00kHz Stop 30.00MHz -10 -10 -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 20A 35A -70 -70 25A 40A 30A 50A -80 -80 -90 -90 Start 30.00kHz Stop 30.00MHz Start 30.00kHz Stop 30.00MHz 2 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com