FCSL Series Metal Foil Current Sense Ohmite continues to add to its complement of Current Sense offerings with the FCSL FeatureS Series. FCSL incorporates proven metal foil Foil Construction ensures a ver y stable TCR (Temperature technology to produce the ultimate in a cur- Coefficient of Resistance) rent sense resistor. FCSL features the effec- Designed for automatic insertion tive combination of very low and stable TCRs (Temperature Coefficient of Resistance) avail- Industr y standard sizes able in a wide selection of very low ohmic High heat resistant use values. Power ratings up to 10 Watts makes Low heat electromotive use FCSL the ideal choice for your current sens- ing applications. Color: white (top) and green (bottom) SerieS SpeCiFiCationS CharaCteriStiCS Power Resistance TCR Weight Test Condition Maximum R Series Rating Range (m) Tol. (ppm/C) (g) Overload (10W) Rated power x1.5, 5s (1.0%+0.0005) FCSL20 1.0W 2m 5% 100 0.025 Max. temperature 70C 3m ~ 4m 2% 100 for rated power (10W: 100C) 5m ~ 9m 1% 100 Operating -55C ~ +155C 10m ~ 50m 1% 50 temp. range FCSL32 1.5W 1m ~ 2m 5% 100 0.030 Rated voltage (Rated power x Resistance value) V 3m ~ 4m 2% 100 5m ~ 9m 1% 100 In-rush current* Rated current 10 msec ON, (1.0% +0.0005) 60 sec OFF, 10 cycles* (see 10m ~ 50m 1% 50 table below) FCSL64 2.0W 1m 5% 150 0.036 Rapid change of -55C (30min.)/+155C (1.0% +0.0005) 2m 2% 100 temperature (30min.), 100 cy. 3m ~ 100m 1% 50 -55 (30min), Room temp (1.0% +0.0005) 5m ~ 50m 0.5% 50 (3min), +155 (30min), FCSL76 3.0W 1m 5% 150 0.050 Room temp (3min), 100 cy., 2m 2% 100 FCSL20 & 32 only 0.6% -40 (30min), Room temp 3m ~ 100m 1% 50 (3min), +125 (30min), 5m ~ 50m 0.5% 50 Room temp (3min), 1000 cy., FCSL90 4.0W 1m 5% 150 0.071 FCSL150 only 2m 2% 100 Solderability 245C 5C for 3 0.5 sec. Min. 90% cover- 3m ~ 100m 1% 50 age (FCSL20-32: 5m ~ 50m 0.5% 50 95%) FCSL110 5.0W 1m 5% 150 0.096 Endurance at 70C 3C, Rated voltage (1.0% +0.0005) 2m 2% 100 70C 1.5h ON, 0.5h OFF, 1000h (FCSL20-32: (2.0% +0.0005)) 3m ~ 100m 1% 50 260C 5C for 10 1 sec. (0.5% +0.0005) 5 m ~ 50m 0.5% 50 Resistance to (FCSL20-32: No soldering heat FCSL150 10.0W 1m 5% 100 0.316 evid. of mech. 2m 2% 100 damage) 3m ~ 100m 1% 100 Moisture 60C 2C, 90~95% RH, (2.0% +0.0005) (>9m:50) resistance Rated voltage 1.5h ON, 0.5h OFF, 1000h *In-rush Current Terminal strength 10W: Bending width: 2mm (1.0%+0.0005) 1m~10m 12m~100m for 10s1s, Glass epoxy sub- Rated In-rush Max. In-rush Max. strate 1.6mm thick Series Wattage Power Current Power Current FCSL20 1W 20W 45A 14W 20A In-rush current = FCSL32 1.5W 56W 64A 36W 35A (in-rush power/resis- FCSL64 2W 225W 125A 150W 70A tance value), or max. FCSL76 3W 325W 150A 210W 80A current, whichever is FCSL90 4W 440W 180A 300W 100A smaller FCSL110 5W 600W 240A 440W 120A FCSL150 10W 700W 270A 470W 140A 6 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.comFCSL Series Metal Foil Current Sense CharaCteriStiCS Derating Recommended Reflow Temperature Profile For lead free soldering (Sn-Ag-Cu solder) 100 (10W) FCSL20-32 FCSL64-110 80 Preheating: 150 ~ 200 60s ~ 180s 130 ~ 180 60s ~ 90s 60 Heating: Over 217 60s ~ 150s Over 220 30s ~ 90s 40 Peak: 260 Max. 30s 240 ~ 260 Max. 10s Max. number of reflow: 2 20 0 300 300 260 Max. 30s -55 0 50 70 100 155 Peak Peak 240 ~ 260 Max. 10s 250 Ambient Temperature, C 250 FCSL20-32 FCSL64-150 200 200 Reflow Heating 150 150 Over 217 Over 220 60s ~ 150s 30s ~ 90s Preheating Preheating 100 150 ~ 200 100 130 ~ 180 60 ~ 180 sec. 60 ~ 90 sec. 50 50 Time (sec.) Time (sec.) DimenSionS (in..008/mm 0.20) a L Series Power Rating L W 1m 2m and higher t a FCSL20 1.0W 0.049/1.25 0.079/2.0 0.011/0.28 0.024/0.60 1 FCSL32 1.5W 0.063/1.6 0.126/3.2 0.016/0.40 0.014/0.35* 0.024/0.60 4 FCSL64 2.0W 0.122/3.1 0.248/6.3 0.047/1.20 0.020/0.50 0.020/0.50 W FCSL76 3.0W 0.15/3.8 0.3/7.6 0.053/1.35 0.024/0.60 0.020/0.50 3 5 FCSL90 4.0W 0.177/4.5 0.35/8.9 0.063/1.60 0.028/0.70 0.020/0.50 FCSL110 5.0W 0.197/5.0 0.43/11.0 0.063/1.60 0.031/0.80 0.020/0.50 FCSL150 10W 0.295/7.5 0.591/15.0 0.043/1.10 2 t *5m and higher: 0.010 /0.25mm FCSL110 has wrap- around terminals Land Pattern 1. Alumina substrate 4. Protective coating (mm) Value range a b c (Epoxy resin) 2. Resistive element FCSL20 2m~50m 0.50 2.80 2.30 (Ni-Cu-Mn alloy) 5. Marking c FCSL32 1m~4m 0.50 3.20 3.68 (Epoxy resin) 3. Electrode (Ni, Sn) 5m~50m 0.60 3.20 3.68 FCSL64 1m 0.9 4.2 6.6 a 2m~100m 2.2 4.2 6.6 b FCSL76 1m 1.1 4.6 7.8 2m~100m 2.6 4.6 7.8 FCSL90 1m 1.3 5.1 9.2 2m~100m 3.1 5.1 9.2 FCSL110 1m 1.5 5.6 11.2 2m~100m 3.6 5.6 11.2 FCSL150 1m 2.0 8.4 15.2 2m~100m 5.0 8.4 15.2 p aCkaging SpeCiFiCationS Reel (in./mm) FCSL20/32 FCSL64 FCSL76/90 FCSL110 FCSL150 A 7.087 (180 +0/-3) 7.087 (180 +0/-3) 7.087 (180 +0/-3) 7.087 (180 2.0) 12.992 (3302.0) H 0.512 (13 0.2) 0.512 (13 0.2) 0.512 (13 0.2) 0.512 (13 0.2) 0.512 (130.2) H N A E 0.079 (2.0 0.5) 0.079 (2.0 0.5) 0.079 (2.0 0.5) 0.079 (2.0 0.5) 0.079 (2.0 0.5) N 0.236 (60 +1/-0) 0.236 (60 +1/-0) 0.236 (60 +1/-0) 0.827 (21 0.8) 3.937 (1001.0) W1 0.354 (9.0 0.3) 0.518 (13.0 0.3) 0.669 (17.0 0.3) 1.000 (25.4 1.0) 1.000 (25.4 1.0) W2 0.449 (11.4 1.0) 0.669 (17.0 1.4) 0.764 (19.4 1.0) 1.157 (29.4 1.0) 1.157 (29.4 1.0) E W 2 W 1 (continued) 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 7 Percent Rated Power R010 Temperature C Temperature C