FPA100 Thick Film Power Resistors Due to a Non-Inductive design these elements are ideally suited for high frequency and pulse load applications. The FPA100 is available connected as 2 terminals or 4 terminals, in parallel or series. Isotop/SOT227 Semiconductor Style 100 Watts dissipation in a small footprint Very low inductance Direct heatsink mounting RoHS Compliant Characteristics Ohmic value range: E24, contact ARCOL for values outside this series Tolerance (Code): Standard J (5%) and K (10%). Also available F (1%) on request TCR: Standard 100ppm (at +105C ref to +25C). Also available 50ppm and 250ppm on request Power rating at 25 C: 100W Max working voltage: 1kV rms Resistance range: 1R to 5M Voltage proof: Dielectric strength 4kV Thermal resistance to cooling plate: R< 0.35C/W Partial discharge: Up to 2kV rms / 80 pC Capacitance/mass: 40pF Working temp range: -55C to +155C Max. torque for contacts (static): 1.3Nm Max. torque for base plate (static): 1.5Nm Inductance: 50nH Derating Curve Ordering Procedure 100 Standard (Version 1) Resistor Specify Series, Watts, Ohmic Value, Tolerance Code, e.g.: FPA100 2R2 J 75 Versions 2, 3, 4 or 5 Specify Series, Watts, Ohmic Value or 50 Values, Tolerance Code and then Version Number, e.g.: FPA100 2R2 2R2 J version 4. 25 Refer to versions available on page 2. 0 TCR as standard 100ppm For 50ppm or 250ppm, please specify 0 25 50 100 125 155 Temperature C at the end of the part number e.g.: FPA100 100R J 50ppm ARCOL UK Limited, The information contained herein does not form part of Threemilestone Ind. Estate, a contract and is subject to change without notice. Arcol Truro, Cornwall, TR4 9LG, UK. operate a policy of continual product development, therefore, T +44 (0) 1872 277431 specifications may change. F +44 (0) 1872 222002 It is the responsibility of the customer to ensure that the E sales arcolresistors.com component selected from our range is suitable for the intended www.arcolresistors.com application. If in doubt please ask Arcol. Page 1 of 2 10 / 11.17 Rated Power %FPA100 Thick Film Power Resistors Dimensions (mm) A M 1 G M4 2 L A B C D E F Min 38.0 30.1 12.6 4.1 4.1 24.4 8.2 Max 38.2 30.3 12.8 N/A 4.3 26.4 G J K L M N D E C F Min 7.8 14.9 0.75 1.95 8.9 11.8 Max 8.2 15.0 0.85 2.05 9.1 12.2 3 J 4 K N B Versions Available 1 4 1 2 1 2 2 3 4 1 4 5 3 1 2 1 2 3 4 3 4 Page 2 of 2 10/ 11.17