Ohmites High Voltage Flip Chip Series incorporates HVF Series high accuracy screen printing technology to achieve high voltage capability in a stable flip chip SMD chip High Voltage resistor package. The HVF Series offers unmatched Flip Chip Film performance in comparison to standard chip resis- tors. Its unique design provides lower voltage and This product has been temperature coefficients, less noise, tighter toler- DISCONTINUED ances, better stability, higher resistance values, and December 2017 higher voltage ratings. HVF is available in convenient 1206 and 2512 footprints. FeatureS High voltage up to 3,000 volts Industry standard sizes Working temperature range 55C to 200C Designed for automatic insertion Non-magnetic construction SerIeS SPeCIFICatIONS Series Resistance Range Tol. Power Rating (mW) Voltage Rating* HVF1206 1K-100M 1% std. 300 1,500 >100M-10G 5% >10G-100G 10% HVF2512 1K-100G 1% std. 1000 3,000 *Use Ohms Law (V= P*R) to calculate maximum working voltage. **Maximum available quantity per reel is 3,500 for 1206 size and 2,000 for 2512 size call 1-866-9-OHMITE for details. CHaraCterIStICS Resistance Range 1K to 100G Resistance Tolerance 1% std. 5% for HVF1206 100M-10G more 10% for 10G+ 100ppm std. Temperature Coefficient Coating Silicone Solder Pad Material Silver (PdAg) Note: HVF Series should not be used with tin-lead based solder compositions. Only silver-based solder composi- tions are recommended. Care should be taken in the selection of the solder flux contained in the solder paste. Some pastes arecorrosiv and can damage the coating and also the resistive layer during the soldering pro- cess at high temperature. PCBs must be properly cleaned to remove any layers of moisture containing halides below the resistor. We recommend Halide Free (or Halogen Free) solder pastes, containing for example ROL0 or similar. It is advisable for the PCB layout to provide a slot, or air gap, underneath the downward facing resistor element, thereby increasing insulation resistance and reducing the possibility of capacitive coupling to the PCB. Under no circumstances should any copper trace be present in the layout directly under the resistive element. Derating Voltage coefficient of Resistance Resistance VCR *Typical values. Voltage 100 Series Range (-ppm/V)* coefficient of resistance 70 80 strongly depends on the 1206 1K ..10M <3.20 >10M ..100M <15.00 resistance value. Contact 60 >100M ..1G <29.00 Ohmite for details. >1G .. 5G <40.00 40 2512 1K ..30M <0.80 >30M ..300M <4.00 20 >300M ..3G <7.00 >3G .. 5G <10.00 0 0 50 100 150 200 Ambient Temperature, C 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 23 Percent Rated WattsHVF Series High Voltage Flip Chip Film PerFOrmaNCe data Insulation Resistance >10,000 M 500 Volt 25 C 75% relative humidity Dielectric Strength >1,000 Volt 25 C 75% relative humidity Thermal Shock R/R < 0.1% typ., 0.50% max. MIL Std. 202, method 107, Cond. C (IEC 68 -2 -14) Overload R/R < 0.1% typ., 0.50% max. 1,5 x Pnom, 5 sec (do not exceed max. voltage) Moisture Resistance R/R < 0.1% typ., 0.50% max. MIL Std. 202, method 106 (IEC 68 -2 -3) Load Life R/R < 0.1% typ., 0.50% max. 1000 hours at rated power (IEC 115 -1) dImeNSIONS taPe aNd reel (in. 0.008) Per EIA Std. RS-481 Silicone Aluminum Oxide a Tape 0.157 .004 4.0 0.10 T 0.059 +.004/-0.0 0.032 .004 W 0.069 .004 1.5 +0.10/-0.0 0.81 0.10 0.079 .002 1.75 0.10 2.0 0.05 L Ruthenium Oxide Silver (PdAg) 0.315 .012 8.0 0.30 B Land pattern 0.138 .002 M 3.5 0.05 N L 0.157 .004 Land pattern 4.0 0.10 A dimensions are for reference only O DIRECTION OF FEED Series L W a T (max.) M N O L 0.128 0.063 0.018 0.028 0.150 0.040 0.080 0.070 HVF1206 HVF2512 0.252 0.126 0.026 0.032 0.288 0.062 0.140 0.164 Trailer Components Leader 230mm min.560mm Minimum of 40 OrderINg INFOrmatION max. May consist of empty component carrier and/or cover tape pockets sealed Taping Code followed by a minimum with cover tape RoHS blank = bulk package Compliant T = tape & reel of 160mm of carrier with sealed cover tape HVF1206T1004JE T High Voltage Case Size TCR Ohms Tolerance Reel F = 1% Flip Chip 1206 T = 100 ppm First 3 digits are G = 2% Series 2512 V = 50 ppm* significant last J = 5% 0.56 max. digit specifies K = 10% *Not available for all resistance number of zeros to 14.2 max. values consult factory follow. Example: 1006 = 100M 0.512 .008 13.0 .20 Standard part numbers 7.00 .079 1.969 min. Ohms HVF1206--- HVF2512--- 178.0 2.0 50.0 min. 25K ---T2502FE ---T2502FE 50K ---T5002FE ---T5002FE 0.331 +.059/-0.0 75K ---T7502FE ---T7502FE 100K ---T1003FE ---T1003FE 8.4 +1.5/-0.0 250K ---T2503FE ---T2503FE 500K ---T5003FE ---T5003FE 1000K ---T1004FE ---T1004FE 1500K ---T1504FE ---T1504FE 2000K ---T2004FE ---T2004FE 2500K ---T2504FE ---T2504FE Standard Qty/Reel is 1000 maximum available quantity per reel is 3,500 for 5000K ---T5004FE ---T5004FE 1206 size and 2,000 for 2512 size call 1-866-9-OHMITE for details. 7500K ---T7504FE ---T7504FE 1G ---T1007JE ---T1007FE 5G ---T5007FE 10G ---T1008JE rev 1/18-1 24 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com