Product Information

OF224KE

OF224KE electronic component of Ohmite

Datasheet
Carbon Composition Resistors 1/4 WATT CARBON COMP RESIST.10%

Manufacturer: Ohmite
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 0.8761 ea
Line Total: USD 0.8761

756 - Global Stock
Ships to you between
Wed. 10 Apr to Fri. 12 Apr
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
701 - Global Stock


Ships to you between Wed. 10 Apr to Fri. 12 Apr

MOQ : 1
Multiples : 1

Stock Image

OF224KE
Ohmite

1 : USD 0.8935
10 : USD 0.7969
50 : USD 0.7406
100 : USD 0.6026
200 : USD 0.5141
500 : USD 0.445
1000 : USD 0.4036
2500 : USD 0.3876

     
Manufacturer
Product Category
Termination Style
Resistance
Power Rating
Tolerance
Voltage Rating
Series
Diameter
Length
Packaging
Hts Code
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
MMV02F62R0E electronic component of Ohmite MMV02F62R0E

Res 0402 62 Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD
Stock : 50000

MMV02F82R0E electronic component of Ohmite MMV02F82R0E

Res 0402 82 Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD
Stock : 50000

MMV02F100RE electronic component of Ohmite MMV02F100RE

Res 0402 100 Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD
Stock : 50000

MMV02F2K00E electronic component of Ohmite MMV02F2K00E

Res 0402 2K Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD
Stock : 50000

MMV02F6K20E electronic component of Ohmite MMV02F6K20E

Res 0402 6.2K Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD
Stock : 50000

MMV02F8K20E electronic component of Ohmite MMV02F8K20E

Res 0402 8.2K Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD
Stock : 50000

MMV02F22K0E electronic component of Ohmite MMV02F22K0E

Res 0402 22K Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD
Stock : 50000

MMV02F33K0E electronic component of Ohmite MMV02F33K0E

Res 0402 33K Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD
Stock : 50000

MMV02F47K0E electronic component of Ohmite MMV02F47K0E

Res 0402 47K Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD
Stock : 50000

MMV02F49K9E electronic component of Ohmite MMV02F49K9E

Res 0402 49.9K Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD
Stock : 50000

Image Description
RC12JB3R30 electronic component of Stackpole RC12JB3R30

3.3 Ohms ±5% 0.5W, 1/2W Through Hole Resistor Axial Non-Inductive, Pulse Withstanding Carbon Composition
Stock : 1

RC14JB330R electronic component of Stackpole RC14JB330R

330 Ohms ±5% 0.25W, 1/4W Through Hole Resistor Axial Non-Inductive, Pulse Withstanding Carbon Composition
Stock : 0

OF431JE electronic component of Ohmite OF431JE

Carbon Composition Resistors 1/2W 430 ohms 5%
Stock : 1

OF563JE electronic component of Ohmite OF563JE

Carbon Composition Resistors 1/2W 56K ohms 5%
Stock : 0

CBT25J10K electronic component of TE Connectivity CBT25J10K

Carbon Composition Resistors 10 KOhms 1/4W 250V
Stock : 5068

RC1/2221JB electronic component of Kamaya RC1/2221JB

Carbon Composition Resistors 220ohms 5%
Stock : 0

1625875-6 electronic component of TE Connectivity 1625875-6

Carbon Composition Resistors 10 KOhms 1/4W 250V
Stock : 5068

4-1625875-3 electronic component of TE Connectivity 4-1625875-3

Carbon Composition Resistors CBT 1/4 5% 6R8
Stock : 1

OC2255 electronic component of Ohmite OC2255

Carbon Composition Resistors
Stock : 1

OH6205 electronic component of Ohmite OH6205

Res Carbon Composition 62 Ohm 5% 2W Molded AXL
Stock : 1

OD/OF Series Little Demon Carbon Composition Molded 5% & 10% Tolerance FeatureS Ohmites Little Demons are small, reliable carbon composition resistors with exceptional strength. Molded insulation for high dielectric strength They are made tough by a molding process that Rugged construction combines the terminals, insulation and resistive ele- High surge capabilities ment into an integrated unit. Along with their small size, Little Demons perform with low noise, dissipate Comparable to Mil RC07, RC20, and RC32 types heat rapidly and offer high temperature stability. OD/OF Series available in E24 values E12 values Color codes are readable even after prolonged use above 100K thanks to a very durable coating that resists abra- sions and chipping normally associated with auto- matic insertion equipment. SerieS SpeciFicatiOnS Series Mil-R-11 Type Wattage Ohms Tolerance Max. Voltage Dielectric VAC OD RC07 0.25 2.2 - <100K 5% 250 500 100K - 5.6M 10% OF RC20 0.50 2.2 - <100K 5% 350 700 100K - 20M 10% characteriSticS 100,000 Terminals Solder-coated copper terminal. Single Pulse Power Capability Molded Phenolic Body 10,000 Tolerance 5% (<100K) OF 1,000 10% (>100K) OD Derating Linearly from 100% +70C to 0% 130C 100 10 1 -7 -6 -5 -4 -3 -2 -1 10 10 10 10 10 10 10 1 Pulse width (s) DimenSiOnS Series Length max. Diam. max. Lead Dia. 1.135 0.12 D L OD 0.276 / 7.0 0.098 / 2.5 0.024/0.60 28.83mm 3 OF 0.406 /10.3 0.150 / 3.8 0.028/0.70 (continued) 92 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com Pulse Power (W)75mm 5 OD/OF Series Little Demon Carbon Composition Molded 5% & 10% Tolerance packaging All resistors are packaged in sealed poly bags with desiccant Storage: Ohmite recommends storing carbon composition to maintain a consistent humidity during storage. If parts are resistors in a controlled environment at a temperature of 5 to removed from the protective plastic bag they should be used 35C and relative humidity of less than 60%. Inventor y should as soon as possible or resealed in the plastic bag. always be used on a first-in-first-out basis. Tape/Reel OD OF 0.5mm max. 6mm .5 Qty./reel 5000 3000 +1.6 52.4mm Reel size (mm) 260 260 -1.4 Qty./carton 40,000 24,000 260mm Gross carton wt. (kg) 12 13 5 3 Carton size (m ) 0.04 0.04 5.08mm .38 455mm 5 Ammo Box OD OF 1mm max. Tape width (mm) 52 52 Qty./box 2000 2000 60mm 5 (OD) 14.5mm .5 Qty./carton 30,000 30,000 65mm 5 (OF) Gross carton wt. (kg) 10 16 Carton size (m3) 0.03 0.05 3.2mm min. L L 3mm 1 2 75mm 5 L L = 1mm max. 1 2 60.4mm1 60.4mm 1 reSiStOr uSe guiDelineS Carbon composition resistors are manufactured by extruding moisture and, therefore, storage recommendations should be a blend of carbon and organic binders inside a phenolic outer adhered to. Generally, any moisture absorbed during storage body. The extrusion is cut to length, leads inserted, cured, will bebaked ou during the soldering operation. If the prod- and marked to form a finished resistor. The carbon and binder uct is stored properly the resistance shift during the soldering mixture is adjusted to produce different resistance values. The operation will be minimal, less than 2% or 3%. resistors are sorted for 5%, 10%, and 20% tolerance values. Carbon composition resistors are highly hygroscopic and Carbon composition resistors are able to withstand larger changes in resistance value can occur if too much moisture is short-term pulses and higher voltages than film resistors and absorbed. For this reason, it is recommended not to use water are virtually imper vious to ESD events (Electro-static dis- or water-soluble solvents to clean these components. Alcohol charge). Carbon composition resistors are also sensitive to or hydrocarbon solvents are recommended for rinsing. bake prOceDure anD cautiOnS A. Heat Treatment C. Solder heat test after treatment D. Cautions 110C 10C Solder Dip Solderability: may be affected due to oxidization of lead wire 15 hours Type Temp. Time Evaluation Resistance value: some units may not completely recover to B. Frequency of OD 300C 3 sec within 3% original value. heat treatment OF 350C 3 sec within 3% Soldering heat: some treated product may have substantial 1 time only resistance change during soldering operation. It is recom- *Depth of Immersion: 4mm from the resistor mended that parts be tested to evaluate soldering heat body effects. Solder should not come in contact within 4mm of resistor body as this may cause a significant shift in resis- tance value due to high heat exposure. OrDering inFOrmatiOn OD/OF Series available in E24 values RoHS compliant OD683JE -TR Series Ohms Tolerance Packaging OD None = cut reel, 100/bag (std.) 68G= 6.8 <100K : J = 5% -TR = taped and reeled OF 680 = 68 >100K : K = 10% -A = ammo pack 681 = 680 -B = bulk (loose) 682 = 6,800 683 = 68,000 684 = 680,000 rev 11/18-1 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 93 280mm (ref.)

Tariff Desc

8533.10.00 17 No Fixed carbon resistors, composition or film types Free

ELECTRICAL RESISTORS (INCLUDING RHEOSTATS AND POTENTIOMETERS)
Arcol
ARCOL Ohmite
ARCOL / Ohmite
ARCOL UK Ltd
ARCOL/OHMITE
OHMITE CERAMICS RESISTOR DIV.
OHMITE MANUFACTURING
OHMITE MFG

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted