RCC Fixed Carbon Composition Resistors Solid carbon resistors designed for high energy dissipation. These small leaded resistors are non inductive and combine high pulse characteristics with excellent stability Power Dissipation 0.25 watts or 0.5 watts Value Range 1R to 22M Tolerance Options 5%, 10%, 20% Maximum Voltage 500 and 700 Vdc Dielectric Strength Peak pulse voltage is 6kv on 0.25 watt size and 10kv on 0.5 watt RoHS Compliant Characteristics Tolerance Combintation of rated resistance and TCR Rated Limiting Rated Isolation Category & preferred Type dissipation element resistance voltage temperature TCR % number Rated resistance at 70C W voltage V range V range range series at -55C at +125C +6.5 / 0 +1 / -5 1R - 1K J (5%) E24 series RCC025 0.25 250 1R - 5M6 +10/ 0 0 / -6 1K1 - 10K 100 K (10%) +13 / 0 0 / -7.5 11K - 100K -55 +125 E12 series +15 / 0 0 / -10 110K - 1M M (20%) RCC050 0.5 350 1R - 22M 500 +20 / 0 0 / -15 1M1 - 22M E6 series Rated Voltage = (Rated dissipation )x(Rated Resistance) (d.c or r.m.s Voltage) Limiting Element Voltage can only be applied to resistors when the resistance is equal to or higher than the critical resistance value. Critical resistance value is the resistance value at which the rated voltage is equal to the limiting element voltage. Dimensions d H L H D Type L D H d Weight/pc RCC025 6.30.7 2.40.1 303 0.60.05 222mg RCC050 9.50.8 3.60.2 283 0.70.07 422mg Ordering Procedure Storage Standard Resistor: Series, Resistance and Tolerance Code. Temperature 20 15C, humidity 60%RH max. Packaging options: Bulk, Taped and Reel (T&R), Taped Ammo Recommendation storage term 6 months after shipped from (T&A) factory e.g. RCC025 10K J ARCOL UK Limited, The information contained herein does not form part of Threemilestone Ind. Estate, a contract and is subject to change without notice. Arcol Truro, Cornwall, TR4 9LG, UK. operate a policy of continual product development, therefore, T +44 (0) 1872 277431 specifications may change. F +44 (0) 1872 222002 It is the responsibility of the customer to ensure that the E sales arcolresistors.com component selected from our range is suitable for the intended www.arcolresistors.com application. If in doubt please ask Arcol. Page 1 of 3 2/11.49RCC Fixed Carbon Composition Resistors Electrical Specifications Description Requirements Test Methods RCC025 100Va.c, 60s Voltage proof No breakdown or flashover RCC050 500Va.c, 60s Variation of resistance with Measuring temperature: +20C/- See ratings table temperature 55C/+20C/+125C/+20C The applied voltage shall be 2.5 times of the rated R (2% +0.1 ohm) Overload voltage or twice of the limiting element voltage, No visible damage, legible marking whichever is the less severe, 5s Tensile R (2% +0.1 ohm) no visible damage 10N for 5-10s Robustness of Bending R (2% +0.1 ohm) no visible damage 5N twice terminations Torsion R (2% +0.1 ohm) no visible damage 180C, 2 rotation Solderability In accordance with clause 4.17.4.5 235C, 5s After immersion into the flux, the immersion into R (3% +0.1 ohm) Resistance to soldering heat solder shall be carried out 4mm from the body at No visible damage, legible marking 350C for 3.5s Rapid change of temperature R (2% +0.1 ohm) no visible damage 5 cycles between -55C and +125C Dry/damp heat (12+12h cycle), first cycle R (10% +0.5 ohm) Insulation resistance: Climatic sequence Cold/damp heat (12+12h cycle), remaining cycle R100M ohm, no visible damage D.C. load R (10% +0.5 ohm) Insulation resistance: 40C, 95% R.H, 56 days, test a), b), c) of clause Damp test, steady state R100M ohm, no visible damage, legible 4.24.2.1 marking R (10% +0.5 ohm) No visible damage Endurance at 70C Rated voltage 1.5h ON, 0.5h OFF 70C, 1000h Insulation resistance R 1G ohm Endurance at the upper category R (10% +0.5 ohm) No visible damage 125C, no load, 1000h temperature Insulation resistance R 1G ohm Derating Curve Climatic Category 100 55/125/56 Lower category temperature -55C Upper category temperature +125C Duration of the damp heat, steady state test 56 days 0 0 70 125 Temperature C The derated values of dissipation for temperatures in excess of 70C shall be indicated by the curve above ARCOL UK Limited, The information contained herein does not form part of Threemilestone Ind. Estate, a contract and is subject to change without notice. Arcol Truro, Cornwall, TR4 9LG, UK. operate a policy of continual product development, therefore, T +44 (0) 1872 277431 specifications may change. F +44 (0) 1872 222002 It is the responsibility of the customer to ensure that the E sales arcolresistors.com component selected from our range is suitable for the intended www.arcolresistors.com application. If in doubt please ask Arcol. Page 2 of 3 2/11.49 Rated dissipation %