Product Information

A0615107

A0615107 electronic component of OKW

Datasheet
CASE, KEYPAD, COMTEC, 150H

Manufacturer: OKW
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 46.2069 ea
Line Total: USD 46.21

0 - Global Stock
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0 - WHS 1


Ships to you between Thu. 23 May to Wed. 29 May

MOQ : 1
Multiples : 1
1 : USD 69.6191

     
Manufacturer
Product Category
Brand
Enclosure Type
Enclosure Material
External Height - Metric
External Width - Metric
External Depth - Metric
Ip Rating
Body Colour
External Height - Imperial
External Width - Imperial
External Depth - Imperial
Svhc
Height Max
Height Min
Operating Temperature Max
Operating Temperature Min
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
A1016049 electronic component of OKW A1016049

Knob; with pointer; plastic material; Shaft d:4mm; Ø16x16mm
Stock : 99

A1016649 electronic component of OKW A1016649

Knob; with pointer; plastic material; Shaft d:6mm; Ø16x16mm
Stock : 6

A1020048 electronic component of OKW A1020048

Knob; with pointer; plastic material; Shaft d:4mm; Ø20x16mm; grey
Stock : 3

A1020049 electronic component of OKW A1020049

Knob; with pointer; plastic material; Shaft d:4mm; Ø20x16mm
Stock : 4

A1016048 electronic component of OKW A1016048

Knob; with pointer; plastic material; Shaft d:4mm; Ø16x16mm; grey
Stock : 0

A1016068 electronic component of OKW A1016068

Knob; with pointer; plastic material; Shaft d:6mm; Ø16x16mm; grey
Stock : 11

A1016069 electronic component of OKW A1016069

Knob; with pointer; plastic material; Shaft d:6mm; Ø16x16mm
Stock : 33

A1016648 electronic component of OKW A1016648

Knob; with pointer; plastic material; Shaft d:6mm; Ø16x16mm; grey
Stock : 12

A0620007 electronic component of OKW A0620007

CASE, KEYPAD, COMTEC, 200F
Stock : 0

A0620107 electronic component of OKW A0620107

CASE, KEYPAD, COMTEC, 200H
Stock : 0

Image Description
KP9511-110-110 electronic component of Winchester KP9511-110-110

KP9511-110-110 - Each
Stock : 0

K21075D electronic component of Carl Kammerling K21075D

HASP&STAPLE, 75MM
Stock : 0

A0615007 electronic component of OKW A0615007

CASE, KEYPAD, COMTEC, 150F
Stock : 0

ABH1-2AA electronic component of Memory Protection Devices ABH1-2AA

Battery Holder (Covered) 1/2AA 1 Cell PC Pin
Stock : 0

0134 04 electronic component of Lumberg 0134 04

PLUG, R/A, DIN, BAYONET, 4WAY
Stock : 133

K210115D electronic component of Carl Kammerling K210115D

HASP&STAPLE, 115MM
Stock : 0

KP-9920-514-502 electronic component of Winchester KP-9920-514-502

KP-9920-514-502 - Each
Stock : 0

QLK45/1800-2518L electronic component of ebm papst QLK45/1800-2518L

TANGENTIAL BLOWER, 125M3/H, 230V AC
Stock : 0

K12040L40D electronic component of CK Tools K12040L40D

PADLOCK, BRASS, LONG SHACKLE, 40MM
Stock : 0

A0612007 electronic component of OKW A0612007

CASE, KEYPAD, COMTEC, 120F
Stock : 0

PROPERTIES OF PLASTIC MATERIALS The plastic and packaging CHOICE OF RECOMMENDED material used by OKW are on MATERIAL: APPLICATION: the whole harmless and, apart from some exceptions, Reinforced Polyester can easily be recycled and Excellent temperature stability For dimensionally stable and combined with a high degree of impact temperature-resistant parts. Outdoor reutilized. strength. On the whole, a high stability application. against chemicals. Good long-time The plastic properties on rupture strength. pages 222/223 are exclusively Noryl applicable for the specified Extremely good mechanical, thermal Dimensionally stable, heat-resistant, standard test pieces. Combustibility test for and electrical properties. Good ageing self-extinguishing parts, mainly when Variations may occur as far plastics according to stability and weathering resistance. exchanged with metal. Component as cases and technical parts UL subject 94 High stability against chemicals. parts and cases for entertainment are concerned. industry and data processing units. The plastic materials are classified as follows: Polyamide Thermoplast with high temperature Ideally suited for technical application, UL 94 V-0: stability, extremely solid and tenacious. especially for machine elements with The test samples are Good sliding properties and high complicated geometry. capacity of resistance to wear. Contact extinguished within with humidity may result in a change of 5 seconds average time properties. (mean of 10 succesive tests). None of the test Polycarbonate Thermoplast with high temperature Recommended for cases housing sample burns longer than stability with excellent resistance to all instruments and general indoor and 10 seconds. None of the test kinds of temperature. On the whole, outdoor application . Not recommended sample emits burning good resistance against chemicals and for use with strong alkalis or for direct particles. UV-light. exposure to sunlight. UL 94 V-1: PC-ABS Blend The test samples are Good stability in case of high Ideally suited for indoor use with extinguished within temperature combined with enormous moderate corrosive conditions. Limited impact strength as well as toughness at outdoor suitablility. Special materials 25 seconds average time subzero temperature. On the whole, comply with ball-thrust hardness test (mean of 10 succesive good resistance against chemicals. according to VDE 700 at 125. tests). None of the test UV-light may have a negative effect. sample burns longer than 30 seconds. None of the test ABS Good resistance against medium Cases and operating elements of all sample emits burning temperature combined with good kinds. Indoor use, also suitable for low particles. impact strength (only certain types) temperature. Limited outdoor UL 94 V-2: and antistatic adjustment. On the application. Suitable for galvanic whole, good resistance against coating. Same Test as UL 94 V1, but chemicals. UV-light may have a negative the test samples emits effect. burning particles during the test. Polystyrene Normally brittle and resistant to fairly For cases and operating elements with The test samples mentioned low temperature. SB-types are impact working temperature of less than 65. above are extinguished in all resistant and less sensitive to tearing Suitable for indoor use. Exposure to cases. If the test samples under pressure. Glossy surface. UV-light should be avoided. Metal-cutting is possible. keeps burning after 30 seconds, a horizontal test can be carried out to reach PMMA (plexiglass ) the classification UL 94 HB. Good mechanical properties, slightly Cases and front panels for infrared brittle. Superior from optical point of transmitters and receivers as well as view. Permeable to light up to 92% for transparent parts. certain types. Subject to technical modification without notice. Typographical and other errors do not justify any claim for damages. 221 Stand: 11/98 e Copyright 1998 OKW Gehusesysteme KG Germany (PROPERTIES OF PLASTIC MATERIALS Modified Polyether Polyamide Poly- PPE (PPO) PA carbonate Abbreviation 5 PPE + PS PA 6x PA 6x PC Tradename 5 Noryl Noryl reinforced unreinforced reinforced APPLICATION FOR Abbreviation of product groups, NEG type A NEG type B MG Handle bar RB, THE FOLLOWING see below this page Cable glands DT PRODUCT GROUPS (transparent cover) MECHANICAL PROPERTIES Unit Testmethod 2 Impact resistance KJ/m ISO 179 DIN 53 453 10 no fracture 30 no fracture 2 Notch resistance KJ/mm ISO 179 DIN 53 453 12 9 no fracture 30 2 Ball identation hardness N/mm DIN 53 456 113 117 120 150 110 Ball-thrust hardness test at 125 THERMAL PROPERTIES Unit Testmethod Heat distortion temperature C ISO 75-A DIN 53 458 100 160 128 Application temperature ca. C 100 110 100 110 110 Cold distortion temperature C 40 40 40 40 150 UL combustibility test Fire classif. UL-94 V0 V1 HB HB ELECTRICAL PROPERTIES Unit Testmethod Tracking resistance KC/CTI Stage IEC 112 600 500 250 15 15 15 15 16 Specific volume resistivity Ohm cm DIN 53 482 VDE 0303 10 10 10 10 10 RESTISTANCE OF MATERIAL TO* Gasoline + + Diesel oil + + p Sea water + + + + + Hydrochloric acid, 10% + + + Weak alkaline solutions + + Strong alkaline solutions + + Atmospheric influences pp +++ Lactic acid + + pp + Acetone + + Values at room temperature: + = constant p = conditionally constant = inconstant Abbreviation of product groups (catalogue page...): DC Datec-Controls (31-38) FG Flat-Pack Cases (169-176) NEG DIN-Modular Cases (181-198) TT Toptec Cases (165-168) DKB Datec-Keyboards (129-132) Kombi-PG Combi Desk Cases (128) PG Desk Cases (123-127) URB Uni-Resist-Boxes (85-88) DMB Datec-Mobil-Boxes (25-30) LG Lux Cases (137-146) RB Robust-Boxes (77-84) VB Vario-Boxes (47-64) DPB Datec-Pocket-Boxes (19-24) MB Hand-Held-Boxes (39-44) SG Shell-Type Cases (91-104) WG Wall-mounting Cases (65-76) DT Datec-Terminals (111-122) MG Potting Boxes (199-202) SM Smart-Cases (13-18) EG Euro Cases (147-162) MOT Motec Cases(105-110) StG Plug Cases (177-180) * Simultaneous exposure to different media may alter the resitive properties of a material To be safe, it is advisable to test the cases 222 for sufficient resistance of the material under the conditions of the specific application. PROPERTIES OF PLASTIC MATERIALS

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted