A8025150 OKW

POTTING BOXES Subject to technical modification without notice. Typographical and other errors do not justify any claim for damages. 209 Stand: 01/02 e Copyright 2002 OKW Gehusesysteme GmbH, Buchen, Germany (POTTING BOXES Boxes for encapsulating electronic assemblies. With special cost advantages in cases of series production because potting electronic assemblies in pre-assembled cases is less complicated than casting liquid resin-hardener compounds in metal moulds. Potted assemblies are protected from shock and temperature, humidity and chemical influences. Production-limited surface quality. VERSION I MATERIAL Duroplastic. Resistant to deformation and extreme temperatures. Inflexible, therefore not re- sistant to fracture. Refer to the material specifications on pages 229-231. STANDARD COLOUR Black. Part-No. Part-No. Outside dim. in mm Wall-thickness Version Box Lid A B C W (mm) 20 20 13 0.8 I A 80 20 130 A 80 25 150 A 81 25 250 25 25 15 0.8 I A 80 25 251 A 81 25 250 25 25 25 0.8 I 30 20 15 1.0 I A 80 30 150 A 81 30 200 40.6 13.8 16 1.0 I A 80 40 160 A 81 40 130 A 80 40 250 A 81 40 130 40.4 13.7 25 0.8 I A 80 40 130 A 81 40 400 40 40 13 1.0 I 40 40 20 1.0 I A 80 40 200 A 81 40 400 45 30 15 1.0 I A 80 45 150 A 81 45 300 45 30 25 1.0 I A 80 45 250 A 81 45 300 A 80 50 150 A 81 50 130 50 13 15 1.0 I A 80 50 160 A 81 50 500 50 50 15 1.3 I 50 50 25 1.3 I A 80 50 250 A 81 50 500 50.7 50.7 50 1.6 I A 80 50 500 A 81 50 500 A 80 70 200 A 81 70 500 70.5 50.5 20 1.4 I A 80 70 350 A 81 70 500 70.8 50.8 35 1.4 I 90 60 20 1.5 I A 80 90 200 A 81 90 600 SERVICE-CENTRE 100 50 25 1.5 I A 80 10 250 A 81 10 500 A 80 10 400 A 81 10 100 100 100 40 2.0 I See pages 221-227. Due to adjustment of the production there are slight tolerances possible. 210 POTTING BOXES