Door Switches 1ZAP2/1VAP2 CSM 1ZAP2 1VAP2 DS E 3 2 Door Switches with Built-in Basic Switches for Long Life Installation in electrical facilities, equipment doors, and other openings helps ensure safety by reliably preventing accidents. A Basic Switch if built in to provide a large switching capacity and long service life. Be sure to read Safety Precautions on page 3 and Safety Precautions for All Basic Switches. Ordering Information Specifications Operation Item Model 1ZAP2 1VAP2- Built-in Switch Model Push Pull Built-in Switch Z-15GL42-B V-15-1B6/V-15-3B6 operation operation 15 A, 125 VAC 15 A, 125 VAC Z-15GL42-B 1ZAP2 (resistive load) (resistive load) Rating 15 A, 250 V 15 A, 250 V 1VAP2-1 (resistive load) (resistive load) Self-reset Hold V-15-1B6 1VAP2-2 Ambient operating 25 to 80C (with no icing or condensation) V-15-3B6 1VAP2-6 temperature Ambient operating 35% to 85%RH humidity Contact Form Mechanical 100,000 operations min. 100,000 operations min. Durability Electrical 100,000 operations min. 25,000 operations min. Model Name Contact form Degree of protection IP00 1ZAP2 Electric shock NC Class II Double-throw protection class 1VAP2-1 COM (SPDT) NO PTI 1VAP2-2 175 (proof tracking index) Single-throw Pollution degree 3 (IEC 947-5-1) 1VAP2-6 COM NO (SPST-NO) Note: 1. The 1VAP2-6 is also available with SPDT contacts. The model number is 1VAP2-6 (V-15-1B6). 2. The built-in switch cannot be replaced. 11ZAP2/1VAP2 Dimensions (Unit: mm) 1ZAP2 Operating Model 1ZAP2 Characteristics 5 6.4 dia. max. Operating force OF max. 21.6 N Pretravel PT max. 4.7 mm Overtravel OT min. 3.2 mm 8-32UNC, Depth: 10 Free position FP max. 11.1 mm (unified screw thread) 78.6 6.4 6.35 dia. 5.50.4 11.1 34.9 11.10.13 FP Four, M4 0.7 7.1 7.9 1 25.4 0.13 10.70.4 16.70.4 57.2 19.5 Three, M4x5.5 binding machine screws Separator Internal toothed washer Z-15GL42-B 1VAP2-1 46.90.3 1VAP2-1 FP 310.2 4.9 6.70.3 OF max. 17.6 N 4.6 20.60.15 0.3 4.8 dia. PT max. 4.4 mm OT min. 2 mm 6.4 6.35 dia. 7.4 dia. max. 10.30.3 FP max. 9.5 mm 5.50.2 330.4 (39.8) 12.70.2 Two, M3.5 6.8 Two, M3.5 holes 40.6 Separator 13.2 Three, M3 0.5 3.2 V-15-1B6 Basic Switch round machine screws with external toothed washers 1VAP2-2 46.9 0.3 1VAP2-2 31 0.2 OF max. 17.6 N 4.9 4.1 Three, M3 holes 12.7 PT max. FP 4.4 mm OT min. 2 mm 4.8 dia. FP max. 9.5 mm 6.35 dia. 7.4 dia. max. 8.7 0.3 46 38.10.2 19.1 0.2 Separator Two, M3 6.4 7.9 V-15-1B6 Basic Switch 40.6 12.7 Three, M3 0.5 3.2 round machine screws with external toothed washers 1VAP2-6 Mounting hole FP 1VAP2-6 8 Cover (steel) OF max. 14.7 N PT max. 6 mm OT min. 12 dia. 3 mm 15 2 FP max. 21 mm 6.35 dia. 66 58 45 P = 1 criss-cross knurling 11 Stainless steel operation rod Two, 9-dia. lead wire pullout holes 8 4.2 0.2 1.2 1 12 37 V-15-3B6 5 15.2 Basic Switch 75.4 10 20 Note: 1. The standard 1VAP2-6 has SPST-NO contacts. 2. The 1VAP2-6 is also available with SPDT contacts. If SPDT contacts are required, order using the following model number. (The built-in switch is the V-15-1B6.) 1VAP2-6 (V-15-1B6) 2