BL6009 R C US Conforms to EN1088, EN292, EN60947-5-1, EN60204-1 UL and C-UL listed G BL6009 Manually Operated Bolt Safety Interlock Switch n n NEMA 6 enclosure enables the Guard lockingmanually BL6009 switch to withstand operated bolt requires up to 20 water washdown cleaning seconds to retract, providing machine run-down time before n Simple operationmanual the guard door can be opened. operation allows locking and Models with longer shafts give unlocking of guard doors with- up to 50% additional delay time. out the need for electrical power n Heavy-duty housingthe n Long lifethe BL6009 switch is die-cast housing and stainless designed for a minimum of ten steel bolt make the BL6009 million actuations suitable for demanding indus- trial applications on simple machines Go to the Engineering Guide For in-depth information on A safety standards and use. For More Guarding Products See Section N for safeguarding N cutting and turning machines OmrOn Scientific technOlOgieS, inc. For the Latest Information USA Tel. 1/888/510-4357 canada Tel. 1/866/986-6766 On the Internet: www.sti.com or www.omron.ca G6 safety interlock switchessafety interlock switches or or or Trojan Cadet/Ensign Elf/Sprite Isomag Rotacam or BL6009 Senator Imp FRS1, 2, 20, 21 FRS3, 4, 5 FRS6, 9, 10 n Operation Ferrocode Sensor Ferrotek Ferrocode Sentinel 1 Sentinel 4+ Contact Arrangement AC/DC A2 A1 AC/DC A2 A1 A1 A2 A1 A2 AC/DC AC/DC 34 34 100% ED. 33 100% ED. 33 7 8 7 8 100% ED. 100% ED. 54 53 22 21 52 51 22 21 or 3 4 3 4 42 11 42 11 9 10 9 10 41 12 41 12 Titan TLS 1 & 2 Titan TLS 3 Atlas 4 Atlas 4 trapped key Centurion Shaft movement 24.1 2.0 1.0 0.08 0mm 11/12 21/22 33/34 or contact Open contact closed Lifeline 1 Lifeline 2 Lifeline 4 Protekta Telescopic G Principle of Operation Interlocking shaft extended in to guard locking an approximate delay of up to 20 seconds, guard closed. Machine in run mode. dependent on the amount of bolt intrusion, CU1 CU2 MSR5T MSR6R/T MSR7R Interlocking shaft is manually retracted from the before access into the guarded area can be guard by rotating the thumb wheel. This gives obtained. MSR7C MSR9T MSR10 RD MSR8T Ferrogard GS1/GS2 Installation AC/DC A1 A2 7 100% ED. When8 installing the BL6009, ensure the shaft can 21 22 only be extended when the guard is closed. 3 4 9 10 If there may be a temptation to devise methods MSR11R & 12T Atlas 4 (3 pole) to decrease the time required to withdraw the MSR14T MSR15D bolt, steps should be taken to prevent this during the installation. Where necessary, alternative devices such as the TL5012, TL8012 or TL8018 or solenoid locking switches should be considered. Trojan Rotacam 3pole Centurion 3pole Spartan Protekta 2 hand control OmrOn Scientific technOlOgieS, inc. For the Latest Information USA Tel. 1/888/510-4357 canada Tel. 1/866/986-6766 On the Internet: www.sti.com or www.omron.ca G7 BUTTON 1 CONTROL UNIT E-STOP SENSOR BUTTON 2 FRS1 FRS2 SENSOR FRS20 CONTROL UNIT FRS21 FRS3 FRS4 FRS5 FRS6 SAFETY GS1 & GS2 FRS9 AUXILIARY FRS10