Panel seal Rocker Switch A8W Panel Seal Rocker Switch for High Capacity Switching Miniature size with High current 16A switching. Easy to mount by snap fitting. Dust & waterproof construction with panel seal (Equivalent to IP67 (IEC-60529)). UL, cUL and TV-8 standard approved. Conforms to EN standards. RoHS Compliant Caution Refer to Precautions List of Models SPST DPST Quantity 2 3 Contact Form 2 per 3 5 6 package Color of caps and cases Black White Black White A8WS-1162 A8WS-2262 A8WD-1162 A8WD-2262 Marking on 100 caps A8WS-1163 A8WS-2263 A8WD-1163 A8WD-2263 Ratings Approved Safety Standards UL, cUL (UL1054/CSA C22.2 No. 55) Non-inductive Inductive Rated load 16A 125 VAC, 16A 250 VAC, TV-8 Resistive load Inductive load Motor load DEMKO (EN61058-1) 125 VAC 16A 16A 10A 16A 125 VAC, 16A 250 VAC 250 VAC 16A 16A 10A Note: Quick connect terminals are not in compliance with IEC standards. Note: 1. The inductive load has a power factor of 0.7 minimum (AC). 2. The motor load has an impulse current 6 times the normal current. 3. The above ratings were tested under the following conditions: (1) Ambient temperature: 202 C (2) Ambient humidity: 655 %RH (3) Switching frequency: 7 times/min. Characteristics Mechanical 20 operations / min max. Permissible operating frequency Electrical 7 operations / min max. Insulation resistance 100 M min. (at 500 VDC with insulation tester) Contact resistance (initial value) 20 m max. (6 to 8 VDC, 1 A, voltage drop method) Between terminals 2,000 VAC 50/60Hz, for 1min of the same polarity Dielectric strength Between terminal 4,000 VAC 50/60Hz, for 1min and case ground Vibration resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude 2 Shock resistance Malfunction 1,000 m/s max. Mechanical 50,000 operations min. Durability Electrical 10,000 operations min. Inrush current 117 A max. Degree of protection Panel seal IEC IP67 Ambient operating temperature - 25 to +55 C (at ambient humidity of 60 % max.) (with no icing or condensation) Ambient operating humidity 25 to 85 %RH (at +15 to 35 C) Weight 7.8 g (SPST), 9.3 g (DPST) 1A8W A8W Dimensions (Unit: mm) Note: The following illustrations and drawings are for 2 poles (DPST) models, A8WS-1162 1 pole (SPST) models have single side terminals. A8WS-1163 Operating Characteristics A8WS-2262 No. of poles 1 (SPST) 2 (DPST) A8WS-2263 Operating force (OF) max. 12 N 1,224 gf 23 N 2,345 gf 17 A8WD-1162 A8WD-1163 A8WD-2262 15.6 A8WD-2263 +0.3 24 -0.5 10.6 5.30.5 2 17.5 2.8 dia. 25.8 3.8 2.1 0.8 1.6 dia. 9.6 17.9 10 12.4 21.5 14.4 14.8 Solder Terminal 250 Quick connect terminal (t=0.8) common use Quick-connect Terminals are not in compliance with IEC standards. Note: Unless otherwise specified, a tolerance of 0.3 mm applies to all dimensions. Panel Cutout X Y Panel thickness (mm) X (mm) Y (mm) +0.1 1.0 to 1.9 22.3 0 Without rubber +0.1 +0.1 cap 2.0 to 2.8 23.2 14.8 0 0 0 +0.1 With rubber cap 2.0 22.4 -0.07 0 R0.30.1 Edge Process the above-mentioned R on the mounting hole side of panel, or be sure that the Play R is on the operation side of panel when using. Be sure that the Edge is on the reverse side of panel when processing. 2 2 5 3 6