D40PSMC21M12

Hall Effect Coded Magnet Non-contact Safety Switches D40P Hall effect coded magnet non-contact switches monitor the status of guarding doors. Stainless steel housings for high hygiene demands in the food industry are available. Solid state design uses Hall effect technology for long life operation with no mechanical parts to wear LED indicates operation state Operates with all OMRON safety controllers Operates behind stainless steel fittings IP69K versions suitable for high pressure cleaning and CIP/SIP processes. Special food types have blind mounting holes to minimize debris collection. Conforms to safety categories up to PLe acc. EN ISO13849-1 Connect up to 20 switches in series, up to PLd acc. EN ISO 13849-1 LISTED Model Number Structure D40P-**C-21-*- 1 2 3 4 1. Type 3. Cable Length/Connection L: Elongated Sensor 05: 5 m Cable S: Small Sensor 10: 10 m Cable M: Miniature Sensor M12: M12 male connector, 8 pin, fitted with 250 mm cable B: Barrel Sensor 4. Cable Exit Direction* L: Exit to the left 2. Housing Material R: Exit to the right P: Plastic Housing M: Stainless Steel Housing * only for D40P-MPC and D40P-MHC H: Hygienic designed Stainless Steel Housing F: Special Food Type Stainless Steel Housing 1D40P Ordering Information Polyester Housing Type Cable Connection Contact Configuration Model Elongated Sensors 5 m pre-wired D40P-LPC-21-05 10 m pre-wired D40P-LPC-21-10 M12, 8 pin, fitted with 250 mm cabl e D40P-LPC-21-M12 Small Sensors 5 m pre-wired D40P-SPC-21-05 10 m pre-wired D40P-SPC-21-10 M12, 8 pin, fitted with 250 mm cabl e D40P-SPC-21-M12 Miniature Sensors 5 m pre-wired cable, exit left D40P-MPC-21-05-L (cable exit right shown) 10 m pre-wired cable, exit left D40P-MPC-21-10-L 2NC/1NO M12, 8 pin, fitted with 250 mm cable, exit lef t D40P-MPC-21-M12-L 5 m pre-wired cable, exit right D40P-MPC-21-05-R 10 m pre-wired cable, exit right D40P-MPC-21-10-R Supplied with screw cap covers to prevent contamination from food deposits M12, 8 pin, fitted with 250 mm cable, exit righ t D40P-MPC-21-M12-R Barrel Sensors 5 m pre-wired D40P-BPC-21-05 10 m pre-wired D40P-BPC-21-10 M12, 8 pin, fitted with 250 mm cabl e D40P-BPC-21-M12 Stainless Steel Housing (Through hole mounting suitable for food splash zones) Type Cable Connection Contact Configuration Model Elongated Sensors 5 m pre-wired D40P-LMC-21-05 10 m pre-wired D40P-LMC-21-10 M12, 8 pin, fitted with 250 mm cabl e D40P-LMC-21-M12 Small Sensors 5 m pre-wired D40P-SMC-21-05 2NC/1NO 10 m pre-wired D40P-SMC-21-10 M12, 8 pin, fitted with 250 mm cabl e D40P-SMC-21-M12 Barrel Sensors 5 m pre-wired D40P-BMC-21-05 10 m pre-wired D40P-BMC-21-10 M12, 8 pin, fitted with 250 mm cabl e D40P-BMC-21-M12 Hygienic (Through M4 mounting holes, suitable for food contact zones) Type Cable Connection Contact Configuration Model Small Sensors 5 m pre-wired D40P-SHC-21-05 10 m pre-wired D40P-SHC-21-10 M12, 8 pin, fitted with 250 mm cabl e D40P-SHC-21-M12 Miniature Sensors 5 m pre-wired cable, exit left D40P-MHC-21-05-L 2NC/1NO (cable exit right shown) 10 m pre-wired cable, exit left D40P-MHC-21-10-L M12, 8 pin, fitted with 250 mm cable, exit lef t D40P-MHC-21-M12-L 5 m pre-wired cable, exit right D40P-MHC-21-05-R 10 m pre-wired cable, exit right D40P-MHC-21-10-R M12, 8 pin, fitted with 250 mm cable, exit righ t D40P-MHC-21-M12-R Special Food Type (Rear M4 mounting holes, suitable for food contact zones) Type Cable Connection Contact Configuration Model Small Sensors 5 m pre-wired D40P-SFC-21-05 2NC/1NO 10 m pre-wired D40P-SFC-21-10 M12, 8 pin, fitted with 250 mm cabl e D40P-SFC-21-M12 2