Resin-case Proximity Sensor E2F D29I-E-01 Proximity Sensor with Resin Case with Superb Water Resistance Rugged, watertight plastic housing offers good chemical resistance and withstands washdown IP68 protection Wide operating voltages: 10 to 30 VDC and 20 to 264 VAC Operation indicator on all models Short-circuit protection available on all DC and some AC models Mutual interference prevention with models with different frequencies is also available. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Be sure to read Safety Precautions on page 5. Ordering Information Sensors Refer to Dimensions on page 6. Model Model Sensing distance Output configuration Operation mode NO NC DC 3-wire, NPN E2F-X1R5E1 2M E2F-X1R5E2 2M M8 1.5 mm AC 2-wire E2F-X1R5Y1 2M E2F-X1R5Y2 2M *1 *1 DC 3-wire, NPN E2F-X2E1 2M E2F-X2E2 2M 2 mm M12 Shielded *1 *1 AC 2-wire E2F-X2Y1 2M E2F-X2Y2 2M *1 *1 DC 3-wire, NPN E2F-X5E1 2M E2F-X5E2 2M M18 5 mm *1 *1 AC 2-wire E2F-X5Y1 2M E2F-X5Y2 2M *2 *2 *1 *1 DC 3-wire, NPN E2F-X10E1 2M E2F-X10E2 2M M30 10 mm *1 *1 AC 2-wire E2F-X10Y1 2M E2F-X10Y2 2M *2 *2 *1. Models with different frequencies are also available. The model numbers are E2F-X 5 (e.g., E2F-X5E15). *2. Models are also available with short-circuit protection. The model numbers are E2F-X Y -53 (e.g., E2F- X5Y1-53). The power supply voltage, however, is 100 to 120 VAC. 1E2F Ordering Information Accessories (Order Separately) Protective Covers Refer to Y92 for details. Mounting Brackets Special resin mounting sleeves: Four different models available. Simply select the size that fits the outside diameter of the Sensor. Mounting Bracket Dimensions A Applied Applicable Item Dimension (mm) B hexagonal Sensor Model A B C D E F G bolts diameter Y92E-B8 180.2 10 max. 18 8 dia. 28 max. 6 7.4 dia. M4 20 M8 E G Y92E-B12 240.2 12.5 max. 20 12 dia. 37 max. 6 8 dia. M4 25 M12 Y92E-B18 320.2 17 max. 30 18 dia. 47 max. 7 9.8 dia. M5 32 M18 F Y92E-B30 450.2 17 max. 50 30 dia. 60 max. 10 9.8 dia. M5 50 M30 C D Note: Consider the influence of surrounding metal when mounting non-shielded Sensors. (Refer to information on individual Sensors for dimensions.) Material: Mounting Bracket: Polyacetal Hexagonal bolt and spring washer: Nickel-plated iron Nut Sets These nut sets are for mounting the Sensors. Order them if you lose the mounting nuts supplied with the sensor. Order the correct set for the outer diameter of your Sensor. Model Item Applicable Sensor Applicable Sensor diameter Set contents Y92E-NWM08-E2F M8 Y92E-NWM12-E2F M12 E2F Clamping nuts (polyacetal): 2 Y92E-NWM18-E2F M18 Y92E-NWM30-E2F M30 2