E3ZRCT61D2M

Oil-resistant Photoelectric Sensors E3ZR-C Photoelectric Sensors That Withstand Cutting Oil to Reduce Failures Caused by Ingress of Cutting Oil Fluororesin cables that strongly resist cutting oil. Sealing methods that prevent gaps at joints block the ingress of cutting oil. IP67G * degree of protection (JIS C 0920 Annex 1). Refer to Safety Precautions on page 7. *The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards). The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance to oil. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Features Fluororesin Outer New Rubber Material Method for Complete Laser Fluororesin New Rubber Welding Sheath Material Sealing without Adhesive Cable Sheath Combining HNBR and Joints between Metal Parts Fluororesin, which provides Fluororubber Provides Gaps are sealed by fusing the metal case and superior resistance to corrosion, is used for Superior Resistance to Oil cover with a laser beam. the outer cable sheath to suppress cable swelling and deterioration and prevent the This new rubber material has been used in all Secured and sealed with laser welding Cutting oilCutting oilCutting oil ingress of cutting oil into the PCB inside the vital seals to prevent the ingress of cutting oils. Sensor. Cover Important Sealing Sections Blocked.Blocked.Blocked. Inside of Case Cutting Oil Sensor Joints between Metal and Non-metal Parts Blocked.Blocked.Blocked. Securing the metal case and lens cover with laser welding makes the compressed O-ring seal the gap. Cutting Oil Cutting Oil O-ring (New rubber Secured with laser welding material combining Lens cover HNBR and fluororubber) BlocBlocBlocked.ked.ked. Blocked.Blocked.Blocked. Blocked.Blocked.Blocked. Case Cutting oilCutting oilCutting oil Inside of Sensor Lens material Applications Engine Block Passage Detection Metal Workpiece Detection 1E3ZR-C Ordering Information Sensors Refer to Dimensions on page 9. Red light Oper- Model Sensing Connection Sensing Appearance ation method method distance NPN output PNP output mode E3ZR-CT61L 2M E3ZR-CT81L 2M Pre-wired (2 m) Emitter E3ZR-CT61L-L 2M Emitter E3ZR-CT81L-L 2M *4 Receiver E3ZR-CT61L-D 2M Receiver E3ZR-CT81L-D 2M Light ON E3ZR-CT61L-M1TJ 0.3M E3ZR-CT81L-M1TJ 0.3M M12 Smartclick pre-wired Emitter E3ZR-CT61L-L-M1TJ 0.3M Emitter E3ZR-CT81L-L-M1TJ 0.3M connector (0.3 m) Through-beam Receiver E3ZR-CT61L-D-M1TJ 0.3M Receiver E3ZR-CT81L-D-M1TJ 0.3M (Emitter + 30 m E3ZR-CT61D 2M E3ZR-CT81D 2M Receiver) *1 Pre-wired (2 m) Emitter E3ZR-CT61D-L 2M Emitter E3ZR-CT81D-L 2M *4 Receiver E3ZR-CT61D-D 2M Receiver E3ZR-CT81D-D 2M Dark ON E3ZR-CT61D-M1TJ 0.3M E3ZR-CT81D-M1TJ 0.3M M12 Smartclick pre-wired Emitter E3ZR-CT61D-L-M1TJ 0.3M Emitter E3ZR-CT81D-L-M1TJ 0.3M connector (0.3 m) Receiver E3ZR-CT61D-D-M1TJ 0.3M Receiver E3ZR-CT81D-D-M1TJ 0.3M Pre-wired (2 m) E3ZR-CR61L 2M E3ZR-CR81L 2M *4 Light ON M12 Smartclick pre-wired E3ZR-CR61L-M1TJ 0.3M E3ZR-CR81L-M1TJ 0.3M 2.5 m *3 Retro-reflective connector (0.3 m) (100 mm) with MSR (When using E39-R1R Pre-wired (2 m) function Oil-resistant Reflector) E3ZR-CR61D 2M E3ZR-CR81D 2M *2 *4 Dark ON M12 Smartclick pre-wired E3ZR-CR61D-M1TJ 0.3M E3ZR-CR81D-M1TJ 0.3M connector (0.3 m) Pre-wired (2 m) E3ZR-CD61L 2M E3ZR-CD81L 2M *4 Light ON M12 Smartclick pre-wired E3ZR-CD61L-M1TJ 0.3M E3ZR-CD81L-M1TJ 0.3M connector (0.3 m) Diffuse- 0.5 m reflective Pre-wired (2 m) E3ZR-CD61D 2M E3ZR-CD81D 2M *4 Dark ON M12 Smartclick pre-wired E3ZR-CD61D-M1TJ 0.3M E3ZR-CD81D-M1TJ 0.3M connector (0.3 m) *1. Through-beam Sensors are sold in sets that include both the Emitter and Receiver. An order for the Emitter or Receiver alone cannot be accepted. *2. The Reflector is sold separately. Select the Reflector model most suited to the application. *3. Values in parentheses indicate the minimum required distance between the Sensor and Reflector. *4. Models with 5-m cable length are also available with5 suffix. (Example: E3ZR-CT61L 5M) Accessories (Sold Separately) Sensor I/O Connectors (M12, Sockets on One Cable End) (Models for Pre-wired Connectors) A Sensor I/O Connector is not provided with the Sensor. It must be ordered separately as required. Cable diameter Sensor I/O Connector Applicable Photoelectric Appearance Cable length (mm) model number Sensor model number Straight, 2 m XS5FR-D423-D80-RB1 Smartclick Oil-resistant Connectors 4 dia. 5 m XS5FR-D423-G80-RB1 E3ZR-C 1 -M1TJ 10 m XS5FR-D423-J80-RB1 Note: Refer to the XS5 R on page 51 for connector details and for information on cables with connectors on both ends. 2