1 Introduction 2 Preparations 3 Digital Temperature Controllers Part Names and Basic Procedures 4 Basic Operation Users Manual 5 E5CC Advanced Operations E5EC 6 Parameters 7 User Calibration A Appendices I Index H174-E1-01 Preface Preface The E5CC and E5EC are Digital Controllers. The main functions and characteristics of these Digital Controllers are as follows: Any of the following types of input can be used: thermocouple, platinum resistance thermometer, infrared sensor, analog voltage, or analog current. Either standard or heating/cooling control can be performed. Both auto-tuning and self-tuning are supported. Event inputs can be used to switch set points (multi-SP function), switch between RUN and STOP status, switch between automatic and manual operation, start/reset the simple program function, and perform other operations. Heater burnout detection and heater short (HS) alarms functions are supported. (Applicable models with heater burnout detection function.) Communications are supported. (Applicable to models with communications.) User calibration of the sensor input is supported. User calibration of the transfer output is supported. (Applicable to models with a transfer output.) The structure is waterproof (IP66). Conforms to UL, CSA, and IEC safety standards and EMC Directive. This manual describes how to use the E5CC/E5EC. Read this manual thoroughly and be sure you understand it before attempting to use the Digital Controller and use the Digital Controller correctly according to the information provided. Keep this manual in a safe place for easy reference. Refer to the following manual for further information on communications: E5CC/E5EC Digital Temperature Control- lers Communications Manual (Cat. No. H175). OMRON, 2011 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of OMRON. No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is constantly striving to improve its high-quality products, the information contained in this manual is subject to change without notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication. E5CC/E5EC Digital Temperature Controllers Users Manual (H174) 1