F03-26PEN Omron

Sensing Band F03-16PE CSM F03-16PE DS E 1 7 SUS316 used for core and polyethylene used for sheath to en- sure high resistance to both acidic and alkaline liquids. Sensing Band Stickers that use the same material as the Sens- ing Bands insulating resin are available in 2 types: adhesive- tape type and screw type. Indicates models that allow free cutting. Ordering Information Name Model Liquid Leakage 1 m F03-16PE 1M Sensing Band 2 m F03-16PE 2M 5 m F03-16PE 5M 10 m F03-16PE 10M 15 m F03-16PE 15M 20 m F03-16PE 20M 25 m F03-16PE 25M 30 m F03-16PE 30M 40 m F03-16PE 40M 50 m F03-16PE 50M 100 m F03-16PE 100M Sensing Band Stickers (adhesive tape) F03-26PES * Sensing Band Stickers (screw) F03-26PEN * Note: 1. Specify the cable length for F03-16PE from the list above. 2. The cables can be cut. * 30 Stickers per set Specifications Sheath Polyethylene Core SUS316 stainless steel Ambient operating temperature 10 to 55C Weight Approx. 16 g (1 m) 1F03-16PE Dimensions (Unit: mm) Sensing Band Appearance Structure 4 1.2 20 1.7 8 Materials: Electrodes: SUS316 stainless steel, Sheath: Polyethylene Sensing Band Stickers F03-26PEN (screws) F03-26PES (adhesive tape) Appearance Structure 19.2 5522 32 5 6.5 1.0 12 Adhesive tape 3.0 6.5 (See note.) Material: Polyethylene Two, 3.5 dia. Cut section Material: Polyethylene Note: The shape of the adhesive tape shown above is for securing the F03-16PE. Chemical Resistivity for F03-16PE/-16PT Material Sheath Core Material Sheath Core Polyethylene Fluoroplastic SUS316 Polyethylene Fluoroplastic SUS316 Water AA A Toluene CB B Acetone CA A Phenol BBA Ammonia AA A Butanol BA--- Ethanol BA A Fluorine AAC Hydrochloric acid AA C Hexane CA --- Hydrogen peroxide solutionAA A Benzene CA A Xylene BA A Methanol BAA Cyclohexane CA --- Sulfuric acidCA B Trichloroethylene CA A Phosphoric acidABB Note: 1. A: Not affected at all or only very slightly affected. B: Slightly affected but, depending on the conditions, sufficient for use. C: Affected but may still be used. (Replace the Sensing Band immediately after detection.) 2. The F03-16PE Sensing Band is made from the following materials. Core: SUS316 Insulated sheath: Polyethylene 3. In order to prevent secondary fire damage, consider the effect of the atmosphere of the environment and the solution to be detected on the Sensing Band. 4. If the Sensing Band changes shape or color when a liquid is detected, replace the Sensing Band. 2