G6DN PCB Power Relay SPST Slim Power Relay for 5 A switching Slim 5-mm width and miniature size. (20 5.08 12.5 mm) High switching capability 5 A (250 VAC and 30 VDC), and high contact reliability by crossbar-twin contact. Low power consumption 110 mW. Meets application standards EN61010-1 and EN61010-2-201 for reinforced insulation (CTI 600 V min. and Rated insulation voltage 300 V). Actualize electrical durability 100 Kops (-L type) Model Number Legend Application Examples Programmable Controller output G6DN- - Temperature Controller 123 4 Building Automation 1. Number of Poles 3. Enclosure Rating G 1: 1-pole None: Fully sealed Output of control system 6 D 2. Contact Form 4. Classification N A: SPST-NO (1a) None: Standard (E-LIFE 80 Kops) L: High durability type (E-LIFE 100 Kops) SL: General purpose Ordering Information Classification Contact form Enclosure rating Terminal shapes Model Minimum packing unit Standard G6DN-1A 25 pcs/ tube High durability SPST-NO (1a) Fully sealed PCB terminal G6DN-1A-L General purpose G6DN-1A-SL 100pcs/tray Note. When ordering, add the rated coil voltage to the model number. Example: G6DN-1A DC5 Rated coil voltage However, the notation of the coil voltage on the product case as well as on the packaging will be marked as VDC. Example: G6DN-1A 5VDC Ratings Coil Must operate voltage (V) Must release voltage (V) Max. voltage (V) Rated current Coil resistance Power consumption (mA) () (mW) Classification Rated voltage % of rated voltage 4.5 VDC 24.4 184 5 VDC 22.0 227 Standard Approx. 110 12 VDC 9.2 1,309 24 VDC 4.6 5,236 5 VDC 36.0 139 70% max. * 5% min. 160% High durability 12 VDC 15.0 800 Approx. 180 24 VDC 7.5 3,200 5 VDC 22.0 227 General purpose 12 VDC 9.2 1,309 Approx. 110 24 VDC 4.6 5,236 Note. The rated current and resistance are measured at a coil temperature of 23C with a tolerance of 10%. * Operating voltage is less than 72% when the relay is sideways and the marking is right way. Contacts Resistive load Inductive load (cos = 0.4, L/R = 7 ms) Contact Type Cross bar twin Contact material Ag-Alloy and Au plating * 5 A at 250 VAC 2 A at 250 VAC Rated load 5 A at 30 VDC 2 A at 30 VDC Rated carry current 5 A Max. switching voltage 277 VAC, 125 VDC Max. switching current 5 A * Au plating is applied to stationary contact. 1G6DN PCB Power Relay Characteristics Standard High durability General purpose Contact resistance 100 m max. Operate time 10 ms max. Release time 5 ms max. Insulation resistance 1,000 M min. (at 500 VDC) Between coil and 3,000 VAC, 50/60 Hz for 1 min contacts Dielectric strength Between contacts of 750 VAC, 50/60 Hz for 1 min the same polarity Surge withstand Between coil and 6 kV (1.2 50 s) voltage contacts Destruction 10 to 55 to 10 Hz, 2.5 mm single amplitude (5.0 mm double amplitude) Vibration resistance Malfunction 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) 2 Destruction 1,000 m/s Shock resistance 2 Malfunction 100 m/s Mechanical 20,000,000 operations min. (at 18,000 operations/hr) 100,000 operations min. 100,000 operations min. 50,000 operations min. (3 A at 250 VAC, (5 A at 250 VAC, Resistive load) (5 A at 250 VAC, Resistive load) 3 A at 30 VDC Resistive load) 100,000 operations min. 50,000 operations min. 80,000 operations min. Durability (5 A at 30 VDC, Resistive load) (5 A at 30 VDC, Resistive load) Electrical (5 A at 250 VAC, 200,000 operations min. 100,000 operations min. 5 A at 30 VDC Resistive load) (2 A at 250 VAC, Inductive load) (2 A at 250 VAC, Inductive load) G 100,000 operations min. 200,000 operations min. 100,000 operations min. 6 (2 A at 250 VAC, (2 A at 30 VDC, Inductive load) (2 A at 30 VDC, Inductive load) D 2 A at 30 VDC Inductive load) N Failure rate (P level) (reference value) * 0.1 mA at 0.1 VDC Ambient temperature Operating -40C to +90C (with no icing or condensation) Humidity 5% RH to 85% RH Weight Approx. 3 g Note 1. Values in the above table are initial values. Note 2. The contact resistance is measured with 1 A applied at 5 VDC using a fall-of-potential method. Note 3. The insulation resistance is measured between coil and contacts and between contacts of the same polarity at 500 VDC. * This value was measured at a switching frequency of 120 operations/min. 2