Safety Laser Scanner OS32C Compact (104.5 mm), lightweight (1.3 kg) and easy-to-install Safety Laser Scanner Provides a safety circuit of PLd/Safety Category 3 (ISO13849-1) without a dedicated controller. Type 3 Safety Laser Scanner complies with IEC61496-1/-3. 70 sets of safety zone and warning zone combinations are available, supporting complicated changes in working environments. A safety radius up to 4 m and warning zone(s) radius up to 15 m can be set. The minimum object resolution can be changed to 30, 40, 50 or 70 mm. The response time is configurable from 80 ms to a maximum of 680 ms. Reference Boundary Monitoring function prevents unauthorized changes in the scanner position. Minimal down time, sensor block can be replaced without the need to reprogram. For the most recent information on models that have been certified for Refer to Safety Precautions on page 20. safety standards, refer to your OMRON website. Ordering Information OS32C (Power cable is sold separately.) Max. Operating Appearance Description Range Model Remarks (Safety Zone) 3m OS32C-BP OS32C with back location cable entry OS32C-BP-4M 4m 3m OS32C-SP1 OS32C with side location cable entry * CD-ROM (Configuration tool) OS supported: OS32C-SP1-4M 4m Windows XP (32-bit version, Service Pack 3 or later) Windows 7 (32-bit version/64-bit version), Windows 8.1 (32-bit version/64-bit version), 3m OS32C-BP-DM OS32C with Windows 10 (32-bit version/64-bit version) EtherNet/IP and For configuration tool version, refer to page 23. back location cable entry OS32C-BP-DM-4M 4m 3m OS32C-SP1-DM OS32C with EtherNet/IP and side location cable entry * 4m OS32C-SP1-DM-4M * For OS32C-SP1(-DM), each connector is located on the left as viewed from the back of the I/O block. 1OS32C Power Cable Appearance Description Model Remarks Cable length: 3 m OS32C-CBL-03M Cable length: 10 m OS32C-CBL-10M One cable is required per sensor. Cable length: 20 m OS32C-CBL-20M Cable length: 30 m OS32C-CBL-30M Ethernet Cable Appearance Description Model Remarks Cable length: 2 m OS32C-ECBL-02M Cable length: 5 m OS32C-ECBL-05M Required for configuration and monitoring. Cable length: 15 m OS32C-ECBL-15M Note: An ethernet cable with an M12, 4-pin connector is required. Mounting Brackets Appearance Description Model Remarks Bottom/side mounting bracket x 1, Bottom/side mounting bracket OS32C-BKT1 unit mounting screws x 4 sets XY axis rotation mounting bracket x 1, unit mounting screws x 6 sets, XY axis rotation mounting bracket OS32C-BKT2 bracket mounting screws x 1 set (must be used with OS32C-BKT1) Simple mounting brackets x 2, Simple mounting bracket OS32C-BKT3 unit mounting screws x 4 sets * Protective cover for window OS32C-BKT4 When using a mounting stand, use an OS32C with side location cable entry (OS32C-SP1(-DM)). The OS32C with back location cable entry Mounting stand OS32C-MT (OS32C-BP(-DM)) cannot be mounted. Use with mounting brackets (OS32C-BKT1 and OS32C-BKT2). Mounting screws x 3 sets Hardware kit for mounting stand OS32C-HDT Use this when mounting a bracket to the mounting stand. * There are eight OS32C mounting screws: four screws for singular use, and four screws for protective cover for window. 2