Switch Mode Power Supply S82S (3/7.5-W Models) CSM S82S DS E 4 3 Miniature DIN Rail Mounting DC-DC Power Supplies 65 mm depth enables mounting onto control panels with 100 mm depth. Inputs: 10.2 to 27.6 VDC (DC input) 7.5-W models provide both 12-V and 15-V outputs. A complete lineup with 10 different models. UL and CSA approved. RoHS-compliant Refer to Safety Precautions for All Power Supplies. Model Number Structure Model Number Legend Note: Not all combinations are possible. Please refer to List of Models in Ordering Information, below. S82S - 1. Input Voltage 3. Output Voltage 1 2 3 7: 12 to 24 VDC 05: 5 V 12: 12 V 2. Power Ratings 15: 15 V 3: 3 W 24: 24 V 7: 7.5 W 27: 12 V 28: 15 V Ordering Information List of Models Note: For details on normal stock models, contact your nearest OMRON representative. Power ratings Output voltage Output current Model 3 W 5 V 0.6 A S82S-7305 12 V 0.25 A S82S-7312 15 V 0.2 A S82S-7315 24 V 0.13 A S82S-7324 7.5 W 5 V 1.5 A S82S-7705 12 V 0.6 A S82S-7712 15 V 0.5 A S82S-7715 24 V 0.3 A S82S-7724 12 V 0.3 A (+12 V)/0.2 A (12 V) S82S-7727 15 V 0.2 A (+15V)/0.2A (15 V) S82S-7728 1S82S Specifications Ratings/Characteristics DC input Item 3 W Single output 7.5 W Dual Output 7.5 W Efficiency (typical) 60% min. 66% min. 64% min. Input Voltage AC No DC 10.2 to 27.6 VDC Current (See note 1.) 0.6 A max. 1.2 A max. Output Voltage adjustment range 5% (See note 3.) None (See note 4.) (See note Ripple (See note 1.) 2% (p-p) max. 2.) Input variation influence 0.5% max. Load variation influence 1.5% max. +V: 1.5% max. V: 3% max. Temperature variation influence 0.05%/C max. Additional Overload protection (See note 5.) 105% min., voltage drop, automatic reset function Other Ambient operating temperature Refer to the derating curve in Engineering Data Storage temperature 25 to 65C Ambient operating humidity 25% to 85% (storage humidity: 20% to 90%) Dielectric strength 1.5 kVAC for 1 min. (between all input terminals and all output terminals/PE terminals), current off: 10 mA Insulation resistance 100 M min. (between all output terminals and all input terminals/PE terminals) at 500 VDC Vibration resistance 10 to 55 Hz, 0.375-mm single amplitude for 2 hours each in X, Y, and Z directions 2 Shock resistance 294 m/s , 3 times each in X, Y, Z directions Output indicator Yes (color: green) Approved standards Refer to List of Certified Models for details. Weight 150 g max. Note: 1. A 100% load for rated input voltage. 2. Output characteristics are measured at the power supply output terminals. 3. If the output voltage adjuster (V.ADJ) is turned, the voltage will increase by more than 50% of the voltage adjustment range. When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be sure that the load is not damaged. 4. The settings for the output voltage must be within the following range: +V: 1% of the rated value V: 5% of the rated value 5. Refer to Overload Protection on page 4 for details. 2