SS-01D2

- SS-P Subminiature Basic Switch SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept S One-piece terminal construction to keep out flux. S A single leaf movable spring construction. P Conforms to North American and European safety Standards. 1 mm MIN Contact Gap Models available for Interlock applications RoHS Compliant Model Number Legend 12 3 SS- GP 1. Ratings 3. Terminals None : Solder terminals 3 : 125 VAC 3 A T : Quick-connect terminals ( 110) 01 : 30 VDC 0.1 A D : PCB terminals 2. Actuator None : Pin plunger L : Hinge lever L13 : Simulated roller lever L111 : Long hinge lever List of Models 0.5 mm Contact Gap Models Terminals Solder terminals Quick-connect terminals ( 110) PCB terminals Ratings Actuator Pin plunger SS-3GP SS-3GPT SS-3GPD 3A Hinge lever SS-3GLP SS-3GLPT SS-3GLPD Simulated roller lever SS-3GL13P SS-3GL13PT SS-3GL13PD Pin plunger SS-01GP SS-01GPT SS-01GPD 0.1A Hinge lever SS-01GLP SS-01GLPT SS-01GLPD Simulated roller lever SS-01GL13P SS-01GL13PT SS-01GL13PD 1 mm MIN Contact Gap Models Terminals Solder terminals Quick-connect terminals ( 110) Ratings Actuator Contact form Long hinge 3A SPST-NO SS-3FL111P-3 SS-3FL111P-3T lever Contact Form SPDT SPST-NO (SS-3FP models) COM NO NC COM NO NC Dummy Separator (Sold Separately), Terminal Connector (Sold Separately) Refer toBasic Switch Common Accessorie 1- SS-P Subminiature Basic Switch Contact Specifications Approved Safety Standards UL (UL1054/CSA C22.2 No.55) Item Model SS-3P models SS-01P models SS-3FP models Model SS-3P / SS-3FP SS-01P Specification Rivet Crossbar Rivet Rated voltage Item Resistive load Material Silver Gold alloy Silver Contact 125 VAC 3 A 0.1 A Gap (standard 0.5 mm 0.5 mm 1 mm min. 30 VDC 3 A 0.1 A value) NC VDE (EN61058-1) Inrush 9 A max. - 9 A max. current NO Rated voltage Model SS-3P / SS-3FP SS-01P Minimum applicable load 125 VAC 3 A 0.1 A S 5 VDC 160 mA 5 VDC 1 mA 5 VDC 160 mA (reference value) * S 30 VDC 3 A 0.1 A * Please refer toUsing Micro Load inPrecaution for more P Testing conditions: 5E4 (50,000 operations) T55 (0 to 55C) information on the minimum applicable load. Ratings SS-3P / Model SS-01P models SS-3FP models Rated voltage Item Resistive load 125 VAC 3 A 0.1 A 30 VDC 3 A 0.1 A Note 1. The above rating values apply under the following test conditions. (1) Ambient temperature: 202C (2) Ambient humidity: 655% (3) Operating frequency: 20 operations/min Note 2. Consult your OMRON sales representative for information on models for other loads. Characteristics Item Model SS-3P models SS-01P models SS-3FP models Permissible operating speed 0.1 mm to 1 m/s (for pin plunger models) Permissible Mechanical 300 operations/min operating Electrical 30 operations/min frequency Insulation resistance 100 M min. (at 500 VDC with insulation tester) Contact resistance (initial value) 50 m max. 100 m max. 50 m max. Between terminals of the 1,000 VAC 50/60 Hz for 1 min same polarity Between current-carrying Dielectric 1,500 VAC 50/60 Hz for 1 min metal parts and ground strength *1 Between each terminals and non-current-carrying 1,500 VAC 50/60 Hz for 1 min metal parts Vibration Malfunction 10 to 55 Hz, 1.5 mm double amplitude resistance *2 2 Durability 1,000 m/s approx. 100G max. Shock resistance 2 Malfunction *2 300 m/s approx. 30G max. 100,000 operations min. Mechanical 1,000,000 operations min. (60 operations/min) (60 operations/min) 70,000 operations min. Durability *3 (20 operations/min, 125 VAC) 200,000 operations min. 100,000 operations min. Electrical (20 operations/min) (20 operations/min, 30 VDC) 100,000 operations min. (20 operations/min, 30 VDC) Degree of protection IEC IP40 Degree of protection against electric Class I shock Proof tracking index (PTI) 250 Ambient operating temperature -25C to +85C (at ambient humidity of 60% max.) (with no icing or condensation) Ambient operating humidity 85% max. (for +5 to +35C) Weight Approx. 1.6 g (pin plunger models) Note. The data given above are initial values. *1. The values for dielectric strength shown are for models with a Separator (refer toMicro Switch Common Accessorie). *2. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel Position value for lever. Close or open circuit of the contact is 1 ms max. *3. For testing conditions, consult your OMRON sales representative. 2