Multi Code Reader V400-R2 Series The Ultra-small Multi-code Reader That Can Handle Speed Improves Machine Takt Time with the Fastest Reading in the Class: Reads Moving Objects at Up to 500 m/min* Distance Variations Stable Reading of Imperfect Codes * Performance may depend on the code that is read and the printing conditions. Refer to Safety Precautions on page 4. Ordering Information Type Model Working distance 65mm V400-R2CF65 Multi Code Reader Working distance 125mm V400-R2CF125 D-sub 9-pin, 0.8M V509-W011 OMRON PLC connecting cable D-sub 9-pin, 5M V509-W016 D-sub 9-pin, 0.8M V509-W011D PC/AT Connecting cable D-sub 9-pin, 5M V509-W016DV400-R2 Series Ratings and Performance Model V400-R2CF65 V400-R2CF125 Direction of view Front view WPC(JAN/EAN/UPC), Codabar(NW-7), ITF, Industrial 2 of 5, Code39,Code93, Code128, Bar code GS1-128(EAN-128), GS1-Databar(RSS-14),GS1-Databar Limited(RSS Limited), Applicable GS1-Databar Expanded (RSS Expanded), GS1-Databar Composite(RSS Composite) codes 2D code QR code, DataMatrix(ECC200), MicroQR code, PDF417, MicroPDF417,AztecCode, MaxiCode, Codablock-F Number of reading digits No upper limit (depends on bar width and reading distance) Light source Two red LEDs (wave length: 617 nm) Aiming light One green LED (wave length: 528 nm) Bar code: 0.076 mm Bar code: 0.127 mm Minimum resolution 2D code: 0.169 mm 2D code: 0.212 mm Image capture device Monochrome CMOS Effective number of pixels 754 480 pixels Reading performance (*) Working distance (WD) 65mm 125mm Field of view Approximately 48 31(for WD = 65 mm) Approximately 93 59(for WD = 125 mm) Pitch angle () 50 Skew angle () 50 Tilt angle () 180 Reading of bar codes R 20mm (UPC 12 line) on curved surfaces (R) Communication specification RS-232C Interface OK/NG outputs NPN open collector output (cable work required) Function setting method Menu sheet reading method or host command method External trigger (Transistor input) Reading trigger Trigger by command (RS-232C) Trigger a test reading by pressing the SCAN button on the product OK signal is turned on to indicate a successful read Functional OK/NG signals OK signal is turned on to indicate a successful read of registered label specifications NG signal is turned on to indicate a successful read of a non-registered label Indication LED OK LED (green) illuminates to indicate a successful read Buzzer Notifies a successful reading with a buzzer sound (Muting available) Power voltage 4.5 to 5.5 VDC Power supply specification Consumption current During operation: 265 mA or less during standby: 70 mA or less Ambient temperature range At operation: 0 to + 45C At storage: -10 to + 60C Ambient humidity range At operation and storage: 20 to 85% RH (with no icing or condensation) Environmental Ambient atmosphere No corrosive gases specifications Ambient light Fluorescent lamp: 10,000lx or less, Sunlight: 100,000lx or less Vibration resistance 10 to 150 Hz, half amplitude 0.35 mm, 3 directions (X/Y/Z), 8 minutes each 10 times Degree of protection IP54 (IEC60529) Main unit only Approximately 90 g Weight Including accessories Approximately 200 g (including mounting bracket and screws) Packaged weight Approximately 280 g (including packing carton) Main unit Approximately 41(W) 33(D) 24(H) mm Dimensions Packing carton Approximately 240(W) 110(D) 40(H) mm Input/output connector Round DIN connector Code length Approximately 1.5 m Minimum bending radius of cord Approximately 23 mm Accessories Operation manual, menu sheet, mounting bracket, M2 6 screws (two), M5 10 screws (two) Case PC, PET, black Reading window PMMA, transparent Material, Color Cable Polyvinyl chloride (PVC), black Mounting bracket SUS304, silver * Unless otherwise specified, the reading performance is defined with angle = 0, = +15, = 0, R = illuminance:100 to 2001x, reading rate: 90% or more. QR code is the registered trademark of DENSO WAVE. 2