V600 RFID System - - V600 HAM42 DRT Intelligent Flag for CompoBus/D Amplifier System Configuration Master Unit Master Unit ( ) CompoBus/D -compatible I/O I/O V600-HAM42-DRT (Amplifier) V600-HS (Sensors) V600-D (Data Carriers)Intelligent Flag III V600-HAM42-DRT An RFID system that is as easy and simple to use as a sensor. No programming required. Conforms to DeviceNet standards. Uses the same main functions (Read, Write, Bit Set, Bit Clear, etc.) as those of the V600-HA Intelligent Flag Series. Responds flexibly to applications with data reading up to 24 bits. Allows data to be written in units of up to 16 bits. CE marking/FCC approvals. Ordering Information/Specifications Amplifier Item V600-HAM42-DRT Communications power supply 11 to 25 VDC (provided from communications connector) voltage Internal circuit power supply voltage 18 to 26.4 VDC Internal current consumption Communications power supply: 40 mA max. Internal circuit power supply: 150 mA max. Noise immunity Internal circuit power supply normal: 600 V Internal circuit power supply common: 1,500 V Dielectric strength 50/60 Hz at 500 V AC for 1 minute leakage current 10 mA max. Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude, with 4 sweeps of 8 min each in 3 directions 2 Shock resistance 294 m/s , 3 times each in 3 directions (18 times total) Ambient temperature 0 to 55C (with no icing) Ambient humidity 35% to 85% RH (with no condensation) Storage temperature 25 to 65C Degree of protection IEC 60529: IP20 (panel mounted) Mounting method DIN track or direct mounting using accessory fittings (M4 screws) Weight Approx. 150 g 2 Intelligent Flag III V600-HAM42-DRT