7SB384DFT2G ON Semiconductor

3 E 7SB384 Bus Switch The 7SB384 Bus Switch is an advanced highspeed line switch in ultrasmall footprint. Features High Speed: t = 0.25 ns (Max) V = 4.5 V PD CC 7SB384 Table 1. MAXIMUM RATINGS Symbol Parameter Value Unit V DC Supply Voltage 0.5 to +7.0 V CC V Control Pin Input Voltage 0.5 to +7.0 V IN V Switch Input / Output Voltage 0.5 to +7.0 V I/O I Control Pin DC Input Diode Current V < GND 50 mA IK IN I Switch I/O Port DC Diode Current V < GND 50 mA OK I/O I OnState Switch Current 128 mA O Continuous Current Through V or GND 150 mA CC I DC Supply Current per Supply Pin 150 mA CC I DC Ground Current per Ground Pin 150 mA GND T Storage Temperature Range 65 to +150 C STG T Lead Temperature, 1 mm from Case for 10 Seconds 260 C L T Junction Temperature Under Bias 150 C J Thermal Resistance SC705/SC88A (Note 1) 350 C/W JA TSOP5 230 ULLGA6/UDFN6 496 P Power Dissipation in Still Air at 85C SC705/SC88A (Note 1) 150 mW D TSOP5 200 ULLGA6/UDFN6 252 MSL Moisture Sensitivity Level 1 F Flammability Rating Oxygen Index: 28 to 34 UL 94 V0 0.125 in R V ESD Withstand Voltage Human Body Mode (Note 2) >2000 V ESD Machine Mode (Note 3) >200 Charged Device Mode (Note 4) N/A I Latchup Performance Above V and Below GND at 85C (Note 5) 100 mA LATCHUP CC Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Measured with minimum pad spacing on an FR4 board, using 10 mmby1 inch, 2 ounce copper trace no air flow. 2. Tested to EIA/ JESD22A114 A 3. Tested to EIA/ JESD22A115 A 4. Tested to JESD22C101A 5. Tested to EIA / JESD78. Table 2. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit V Positive DC Supply Voltage 4.0 5.5 V CC V Control Pin Input Voltage 0 5.5 V I V Switch Input / Output Voltage 0 5.5 V I/O T Operating FreeAir Temperature 55 +125 C A Input Transition Rise or Fall Rate Control Input 0 5 nS/V t / V Switch I/O 0 DC