AR0134CS
1/3inch 1.2 Mp CMOS
Digital Image Sensor
with Global Shutter
Description
The AR0134CS from ONSemiconductor is a 1/3-inch 1.2Mp
www.onsemi.com
CMOS digital image sensor with an active-pixel array of 1280 (H)
960 (V). It is designed for low light performance and features a global
shutter for accurate capture of moving scenes. It includes sophisticated
camera functions such as auto exposure control, windowing, scaling,
row skip mode, and both video and single frame modes. It is
programmable through a simple two-wire serial interface. The
AR0134CS produces extraordinarily clear, sharp digital pictures, and
its ability to capture both continuous video and single frames makes it
IBGA63 9 9
the perfect choice for a wide range of applications, including scanning
CASE 503AG
and industrial inspection.
Table 1. KEY PERFORMANCE PARAMETERS
Parameter Typical Value
Optical Format 1/3-inch (6 mm)
Active Pixels 1280 (H) 960 (V) = 1.2 Mp
Pixel Size
3.75m
ILCC48 10 10
CASE 847AE
Color Filter Array RGB Bayer or Monochrome
Shutter Type Global Shutter
ORDERING INFORMATION
Input Clock Range 650 MHz
See detailed ordering and shipping information on page 2 of
Output Pixel Clock (Maximum) 74.25 MHz
this data sheet.
Output
Serial HiSPi
Features
Parallel 12-bit
rd
ON Semiconductors 3 Generation Global
Frame Rate
Shutter Technology
Full Resolution 54 fps
720p 60 fps
Superior Low-light Performance
Responsivity
HD Video (720p60)
Monochrome 6.1 V/luxsec
Video/Single Frame Mode
Color 5.3 V/luxsec
Flexible Row-skip Modes
SNR 38.6 dB
MAX
On-chip AE and Statistics Engine
Dynamic Range 64 dB
Parallel and Serial Output
Supply Voltage
I/O 1.8 or 2.8 V
Support for External LED or Flash
Digital 1.8 V
Auto Black Level Calibration
Analog 2.8 V
HiSPi 0.4 V
Context Switching
Power Consumption < 400 mW
Applications
Operating Temperature 30C to + 70C (Ambient)
Scene Processing
30C to + 80C (Junction)
Scanning and Machine Vision
Package Options
9 9 mm 63-pin iBGA
720p60 Video Applications
10 10 mm 48-pin iLCC
Bare Die
Semiconductor Components Industries, LLC, 2012
1 Publication Order Number:
March, 2017 Rev. 9 AR0134CS/DAR0134CS
ORDERING INFORMATION
Table 2. ORDERABLE PART NUMBERS
Part Number Description
AR0134CSSM25SUEA0 Mono, iBGA, 25 Shift
AR0134CSSM00SUEA0 Mono, iBGA
AR0134CSSM00SUEAH Mono, iBGA, Head Board
AR0134CSSM00SUEAD Mono, iBGA, Demo Kit
AR0134CSSC00SUEA0 Color, iBGA
AR0134CSSC00SUEAH Color, iBGA, Head Board
AR0134CSSC00SUEAD Color, iBGA, Demo Kit
AR0134CSSM00SPCA0 Mono, iLCC (Parallel)
AR0134CSSM25SPCA0 Mono, iLCC (Parallel), 25 Shift
AR0134CSSC00SPCA0 Color, iLCC (Parallel)
AR0134CSSC00SPD20 Color, Bare Die
AR0134CSSM00SPD20 Mono, Bare Die
AR0134CSSM25SPD20 Mono, Bare Die, 25 Shift
See the ON Semiconductor Device Nomenclature documentation, including information on evaluation kits,
document (TND310/D) for a full description of the naming please visit our web site at www.onsemi.com.
convention used for image sensors. For reference
GENERAL DESCRIPTION
The ON Semiconductor AR0134CS can be operated in its A dedicated FLASH pin can be programmed to control
default mode or programmed for frame size, exposure, gain, external LED or flash exposure illumination.
and other parameters. The default mode output is The AR0134CS includes additional features to allow
a full-resolution image at 54 frames per second (fps). It application-specific tuning: windowing, adjustable
outputs 12-bit raw data, using either the parallel or serial auto-exposure control, auto black level correction, on-board
(HiSPi) output ports. The device may be operated in video temperature sensor, and row skip and digital binning modes.
(master) mode or in frame trigger mode. The sensor is designed to operate in a wide temperature
FRAME_VALID and LINE_VALID signals are output on range (30C to +70C).
dedicated pins, along with a synchronized pixel clock.
FUNCTIONAL OVERVIEW
The AR0134CS is a progressive-scan sensor that single master input clock running between 6 and 50 MHz.
generates a stream of pixel data at a constant frame rate. It The maximum output pixel rate is 74.25Mp/s,
uses an on-chip, phase-locked loop (PLL) that can be corresponding to a clock rate of 74.25 MHz. Figure 1 shows
optionally enabled to generate all internal clocks from a a block diagram of the sensor.
Temperature
External
OTPM Memory PLL
Sensor
Clock
Active Pixel Sensor
(APS)
Array
Power
Timing and Control Auto Exposure
(Sequencer) and Stats Engine
Serial
Output
Pixel Data Path
Parallel
(Signal Processing)
Output
Analog Processing and
A/D Conversion
Flash
Trigger
Two-wire
Serial Control Registers
Interface
Figure 1. Block Diagram
www.onsemi.com
2