Ordering number : ENN2145C DBA250 Diffused Junction Silicon Diode DBA250 25.0A Single-Phase Bridge Rectifier Features Package Dimensions Plastic molded structure. unit : mm Glass passivation for high reliability. 1162 Peak reverse voltage : V =200, 600V. RM DBA250 Average rectified current : I =25.0A. O 9 2.4 4.9 11 14.4 32 max 25 max Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions DBA250C DBA250G Unit Peak Reverse Voltage V 200 600 V RM Average Recitified Current I Ta=40C 6.0 A O 3 Ta=40C, with a 3005 3005 3.0mm Cu fin 25.0 A Surge Forward Current I 50Hz sine wave, 1 cycle 400 A FSM Junction Temperature Tj 150 C Storage Temperature Tstg --40 to +150 C Insulation Voltage V 2kV IS Electrical Characteristics at Ta=25C Ratings Parameter Symbol Conditions Unit min typ max Forward Voltage V I =12.5A 1.05 V F F Reverse Current I V : At each V 10 A R R RM Thermal Resistance Rth(j-c) Junction-Case 1.5 C/W Note : Tightening torque : 0.98Nm max. Note : Per constituent element of bridge. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 41000 GI IM / 52098 HA (KT) / 82595 GI (KOTO) 3089 MO, TS No.2145-1/2 32 max 18 7.2 0.8 6.35Resistive, inductive load Capacitive load 50Hz Resistive, inductive load Capacitive load DBA250 I -- Ta I -- V O F F 40 5 3 3005 3005 3.0mm Cu fin 3 32 2 With fin 24 10 7 5 16 3 Without 8 fin 2 0 1.0 0 40 80 120 160 200 0.4 0.6 0.8 1.0 1.2 1.4 ID01187 Forward Voltage, V -- V ID01188 Ambient Temperature, Ta -- C F I -- n FSM 400 Ta=25C 300 200 100 2537 2537 1.0 10 100 ID01189 Number of Cycles at 50Hz, n Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customers products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customers products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to theDelivery Specificatio for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 2000. Specifications and information herein are subject to change without notice. PSNo.2145-2/2 Ta=150C 25C Surge Foward Current, I -- A Average Rectified Current, I -- A FSM O Forward Current, I -- A F