Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductors system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore ( ), the underscore ( ) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore ( ). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild questions onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. Typical parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.SerDes FIN224C 24-Bit Low-Power Serializer/Deserializer 2244--BBiitt D Deeseseririalalizizeerr 2424--BBitit S Seerriiaalizerlizer October 2009 FIN224C 24-Bit Low-Power Serializer/Deserializer Features Description Data & Control Bits 24 The FIN224C SerDes is a low-power serializer/ deserializer ( SerDes) that can help minimize the cost Frequency 20MHz and power of transferring wide signal paths. Through the Capability HVGA use of serialization, the number of signals transferred from Interface Microcontroller / RGB one point to another can be significantly reduced. Typical Controller Usage I86 & m68 reduction is 5:1 for unidirectional paths. Through the use of Dynamic Current 17mA at 10Mhz differential signaling, shielding and EMI filters can also be Standby Current 10A minimized, further reducing the cost of serialization. Core Voltage (V ) 2.5V to 3.3V DDA/S I/O Voltage (V ) 1.65V to 3.6V DDP The differential signaling is also important for providing a ESD 15KV (IEC) noise-insensitive signal that can withstand radio and Package MLP-40 (6 x 6mm) electrical noise sources. Major reduction in power Ordering Information FIN224CMLX, MLP-40 consumption allows minimal impact on battery life in mobile applications. It is possible to use a single Phase-Locked Loop (PLL) for most applications, including bi-directional operation. Related Resources For samples and questions, please contact: Applications interface fairchildsemi.com. Slider, Folder, and Clamshell Mobile Handsets GSM and CDMA Phones Typical Application SSiimmpplele In Intteerrffaaccee BBuuiillt-t-iinn vo vollttagage e trtrananslslatatiioonn SeSerriialalizizerer DDeseeseriarialliizzerer 7070-1-13030 OhmOhmss ++ ++ -- 22 -- MainMain BBaasseebabandnd 22 DiDissppllaayy ++ ++ -- -- IInnteternrnalal TTeerrmmininaattioionn Figure 1. Mobile Phone Example 2009 Fairchild Semiconductor Corporation www.fairchildsemi.com FIN224C Rev. 1.0.9