Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductors system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore ( ), the underscore ( ) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore ( ). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild questions onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. Typical parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.FMS6151 Ultra-Portable Video Filter Driver June 2010 FMS6151 Ultra-Portable Video Filter Driver Features Description 5th-Order 8MHz (SD) Filter The FMS6151 low-cost integrated video lter is intended Power Down to 25nA to replace passive LC lters and drivers in low-voltage DC-Coupled Input portable video applications. The 5th-order lter provides AC- or DC-Coupled Output better image quality compared to typical 2nd- and 3rd- order passive solutions. DC-Coupled Output Eliminates AC-Coupling Cap SAG Correction Reduces Size of AC-Coupling Cap The FMS6151 is intended to be directly driven by a DC- Fixed Gain of 6dB coupled DAC output. The output can drive an AC- or DC- Small, Lead-Free, MicroPak Packaging coupled doubly terminated coax (150 ) load. DC-coupling the output removes the need for an expensive output Applications coupling capacitor. If an AC-cou pled output is needed, the Digital Still Cameras SAG correction circuit can be used to reduce the AC out- Camera Phones put coupling capacitor value. Input DC levels are offset by Personal Digital Assistants approximately 100mV. This internal level shift is incorpo- Set Top Boxes rated to prevent sync pulse clipping. Digital Video Recorders Offering SAG correction, 6dB xed gain, and a 5th-order low-pass lter in a space-saving MicroPak package makes the FMS6151 well suited for space-sensitive appli- cations, such as cellular phones and digital cameras. Block Diagram V = 2.5V to 3.6V cc EN V IN + V OUT 8MHz, 5th order - SAG Figure 1. Block Diagram Ordering Information Part Number Operating Temperature Range Package Packaging Method FMS6151L6X -40C to +105C 6-Lead MicroPak Reel 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FMS6151 Rev. 1.0.6