ON Semiconductor Is Now To learn more about onsemi, please visit our website at www.onsemi.com onsemi andand other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba onsemi or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided as-is and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. Typical parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and holdo nsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. FSUSB104 Low-Power, Two-Port, Hi-Speed, USB2.0 (480 Mbps) Switch FSUSB104 Low-Power, Two-Port, Hi-Speed, USB2.0 (480 Mbps) Switch Features Description Low On Capacitance: 3.7 pF Typical The FSUSB104 is a bi-directional, low -pow er, tw o-port, Hi-Speed, USB2.0 switch. Configured as a double-pole, Low On Resistance: 3.9 Typical double-throw switch (DPDT) switch, it is optimized for Low Pow er Consumption: 1 A Maximum sw itching betw een tw o Hi-Speed (480 Mbps) sources or a Hi-Speed and Full-Speed (12 Mbps) source. - 15 A Maximum I over an Expanded Voltage CCT Range (V =1.8 V, V =4.3 V) IN CC The FSUSB104 is compatible with the requirements of USB2.0 and features an extremely low on capacitance Wide -3 db Bandw idth: > 720 MHz (C ) of 3.7 pF. The wide bandwidth of this device ON Packaged in Pb-free 10-Lead UMLP (1.4 x 1.8 mm) (720 MHz) exceeds the bandwidth needed to pass the third harmonic, resulting in signals with minimum edge 8 kV ESD Rating, >16 kV Pow er/GND ESD Rating and phase distortion. Superior channel-to-channel Pow er-Off Protection on All Ports When V =0 V CC crosstalk also minimizes interference. - D+/D- Pins Tolerate up to 5.25 V The FSUSB104 contains special circuitry on the switch I/O pins for applications where the V supply is CC pow ered-off (VCC=0), which allow s the device to Applications withstand an over-voltage condition. This device is Cell phone, PDA, Digital Camera, and Notebook designed to minimize current consumption even when the control voltage applied to the SEL pin is lower than LCD Monitor, TV, and Set-Top Box ). This feature is especially the supply voltage (VCC valuable to ultra-portable applications, such as cell phones, allowing for direct interface with the general- purpose I/Os of the baseband processor. Other applications include switching and connector sharing in portable cell phones, PDAs, digital cameras, printers, and notebook computers. Ordering Information Top Operating Temperature Part Number Package Mark Range 10-Lead, Quad, Ultrathin Molded Leadless Package FSUSB104UMX JF -40 to +85C (UMLP), 1.4 x 1.8 mm HSD1+ D+ HSD2+ HSD1- D- HSD2- Sel Control /OE Figure 1. Analog Symbol 2008 Semiconductor Components Industries, LLC. Publication Order Number: November-2017, Rev. 2 FSUSB104/D