Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductors system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore ( ), the underscore ( ) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore ( ). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild questions onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. Typical parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.FSUSB30 Low-Power, Two-Port, High-Speed USB 2.0 (480Mbps) Switch April 2013 FSUSB30 Low-Power, Two-Port, High-Speed USB 2.0 (480Mbps) Switch Features Description Low On Capacitance: 3.7pF (Typical) The FSUSB30 is a low-power, two-port, high-speed USB Low On Resistance: 6.5 (Typical) 2.0 switch. Configured as a double-pole double-throw Low Power Consumption: 1A (Maximum) (DPDT) switch, it is optimized for switching between two 10A Maximum I over an Expanded Control high-speed (480Mbps) sources or a Hi-Speed and Full- CCT Voltage Range (V = 2.6V, V = 4.3V) Speed (12Mbps) source. The FSUSB30 is compatible IN CC with the requirements of USB2.0 and features an Wide -3dB Bandwidth, >720MHz extremely low on capacitance (C ) of 3.7pF. The wide 8kV ESD Protection ON bandwidth of this device (720MHz), exceeds the band- Power-Off Protection when V = 0V D+/D- Pins can CC width needed to pass the third harmonic, resulting in sig- Tolerate up to 5.5V nals with minimum edge and phase distortion. Superior Packaged in: channel-to-channel crosstalk minimizes interference. 10-lead MicroPak (1.6 x 2.1mm) 10-lead MSOP The FSUSB30 contains special circuitry on the D+/D- 10-lead UMLP (1.4 x 1.8mm) pins which allows the device to withstand an overvoltage condition when powered off. This device is also designed Applications to minimize current consumption even when the control Cell phone, PDA, Digital Camera, and Notebook LCD voltage applied to the S pin, is lower than the supply volt- Monitor, TV, and Set-top Box age (V ). This feature is especially valuable to ultra- CC Related Application Notes portable applications such as cell phones, allowing for AN-6022 Using the FSUSB30 / FSUSB31 to Comply direct interface with the general purpose I/Os of the with USB 2.0 Fault Condition Requirements baseband processor. Other applications include switch- ing and connector sharing in portable cell phones, PDAs, digital cameras, printers, and notebook computers. Ordering Information Order Package Product Code Number Number Top Mark Package Description FSUSB30L10X MAC010A FJ 10-Lead MicroPak, 1.6 x 2.1mm 10-Lead Molded Small Outline Package (MSOP), JEDEC MO- FSUSB30MUX MUA10A FSUSB30 187, 3.0mm Wide FSUSB30UMXMLP010A GJ 10-Lead, Quad, Ultrathin, MLP (UMLP) 1.4 x 1.8mm FSUSB30 V CC 1D+ D+ USB2.0 Controller 1D USB Set Top Box Connector (STB) CPU or D DSP 2D+ DVR or Processor Mass Storage Control 2D Controller S OE Figure 1. Typical Application MicroPak is a trademark of Fairchild Semiconductor Corporation. 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FSUSB30 Rev. 1.1.8