Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductors system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore ( ), the underscore ( ) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore ( ). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild questions onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. Typical parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.FT8010 Reset Timer with Configurable Delay Time April 2013 FT8010 Reset Timer with Configurable Delay Time Features Description Long Delay Configurable to 7.5 or 11.25 Seconds The FT8010 is a timer for resetting a mobile device where long reset times are needed. The long time delay Primary and Secondary Input Reset Pins helps avoid unintended resets caused by accidental key Push-Pull and Open-Drain Output Pins presses. Two delays can be selected by hard-wiring the DSR pin: 7.5 20% seconds or 11.25 20% seconds. 1.8 V to 5.0 V Operation (T =-40C to +85C) A The FT8010 has two identical inputs for single or dual 1.7 V to 5.0 V Operation (T =-25C to +85C) A switch resetting capability. The device has two outputs: 1.65 V to 5.0 V Operation (T =0C to +85C) a push-pull output with 0.5 mA drive and an open-drain A output with 0.5 mA pull-down drive. Packaged in 10-Lead UMLP (1.4 mm x 1.8 mm) and 8-Lead MLP (2.0 mm x 2.0 mm) Packages FT8010 draws minimal I current when inactive and CC functions over a wide 1.65 V to 5.0 V power supply range. Ordering Information Operating Packing Part Number Package Temperature Range Method 10-Lead, Ultrathin MLP, 1.4 x 1.8 x 0.55 mm 5000 Units FT8010UMX -40C to +85C Package, 0.40 mm Pitch Tape and Reel 8-Lead, MLP 2.0 x 2.0 x 0.8 mm Package, 3000 Units FT8010MPX -40C to +85C 0.5 mm Pitch Tape and Reel 2009 Fairchild Semiconductor Corporation www.fairchildsemi.com FT8010 Rev. 1.0.8