KAI-1003 1024 (H) x 1024 (V) Interline CCD Image Sensor Description The KAI1003 Image Sensor is a high-performance megapixel monochrome image sensor designed for a wide range of medical www.onsemi.com imaging and machine vision applications. The 12.8 m square pixels with microlenses provide high sensitivity and the large capacity results in large dynamic range. The two output, split horizontal register and several binning modes allow a 15 to 60 frame per second (fps) video rate for the progressively scanned images. The vertical overflow drain structure provides anti-blooming protection, and enables electronic shuttering for precise exposure control. Other features include low dark current, negligible lag and low smear. Table 1. GENERAL SPECIFICATIONS Parameter Typical Value Figure 1. KAI1003 Interline Architecture Interline CDD Progressive Scan CCD Image Sensor Total Number of Pixels 1056 (H) 1032 (V) Features Number of Effective Pixels 1028 (H) 1028 (V) Number of Active Pixels 1024 (H) 1024 (V) Megapixel Progressive Scan Interline CCD 1024 (H) 1024 (V) Imaging Pixels Pixel Size 12.8 m(H) 12.8 m (V) 12.8 m Square Pixels Active Image Size 13.1 mm (H) 13.1 mm (V), 18.5 mm (Diagonal), 13.1 mm Square Imaging Area 4/3 Optical Format Microlenses for Increased Sensitivity Aspect Ratio 1:1 Large Capacity (170 ke ) Number of Outputs 1 or 2 Split Horizontal Register for 1 or 2 Outputs Charge Capacity 170,000 e Binning to 1 2 or 2 2 Output Sensitivity 7.5 V/e Applications Quantum Efficiency (500 nm) 45% Read Noise (f = 20 MHz) 40 e rms Machine Vision 2 Medical Dark Current < 0.5 nA/cm Scientific Dynamic Range 72 dB Blooming Suppression > 100 X ORDERING INFORMATION Smear 80 dB See detailed ordering and shipping information on page 2 of this data sheet. Maximum Pixel Clock Speed 20 MHz Maximum Frame Rate Single Output 15 fps Dual Output 30 fps Dual Output 22 Bin 60 fps Package 28-Pin CERDIP Cover Glass AR Coated, 2 Sides NOTE: All Parameters are specified at T = 40C unless otherwise noted. Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: November, 2015 Rev. 2 KAI1003/DKAI1003 ORDERING INFORMATION Table 2. ORDERING INFORMATION KAI1003 IMAGE SENSOR Part Number Description Marking Code KAI1003AAACRAE Monochrome, No Microlens, CERDIP Package (Sidebrazed), Taped Clear Cover Glass with AR Coating (Both Sides), Engineering Sample KAI1003 Serial Number KAI1003AAACRB2 Monochrome, No Microlens, CERDIP Package (Sidebrazed), Taped Clear Cover Glass with AR Coating (Both Sides), Grade 2 KAI1003ABACDAE Monochrome, Telecentric Microlens, CERDIP Package (Sidebrazed), Clear Cover Glass with AR Coating (Both Sides), Engineering Sample KAI1003M Serial Number KAI1003ABACDB2 Monochrome, Telecentric Microlens, CERDIP Package (Sidebrazed), Clear Cover Glass with AR Coating (Both Sides), Grade 2 Table 3. ORDERING INFORMATION EVALUATION SUPPORT Part Number Description KAI10031220AEVK Evaluation Board (Complete Kit) See the ON Semiconductor Device Nomenclature document (TND310/D) for a full description of the naming convention used for image sensors. For reference documentation, including information on evaluation kits, please visit our web site at www.onsemi.com. www.onsemi.com 2