LA6584JA-AH ON Semiconductor

Ordering number : ENA2125 LA6584JA Monolithic Linear IC Single-phase Full-wave Driver LA6584JA Recommended Operating Range at Ta = 25C Parameter Conditions Conditions Ratings Unit Supply voltage V 2.8 to 14.0 V CC Common-phase input voltage VICM 0 to V -1.5 V CC range of Hall input Electrical Characteristics at Ta = 25C V = 12V, unless otherwise specified. CC Ratings Parameter Conditions Conditions Unit min typ max Circuit current I 1 During drive (CT = L) 4 6 9 mA CC I 2 During lock protection (CT = H) 2 4 6 mA CC Lock detection capacitor charge I1 2.0 2.8 3.5 A CT current Capacitor discharge current I2 0.15 0.23 0.30 A CT Capacitor charge and discharge RCT RCD = I 1/I2 912 15- CT CT current ratio CT charge voltage V1 1.6 1.7 1.8 V CT CT discharge voltage V2 0.6 0.7 0.8 V CT OUT output L saturation voltage V I = 200mA 0.2 0.3 V OL O OUT output H saturation voltage V I = 200mA 0.9 1.2 V OH O Hall input sensitivity VHN Zero peak value 7 15 mV (including offset and hysteresis) RD/FG output pin L voltage V I = 5mA 0.1 0.2 V RD/FG RD/FG RD/FG output pin leak current I V = 15V 1 30 A RD/FGL RD/FG HB output L voltage V I = 5mA 1.3 1.5 1.7 V HBL HB Package Dimensions unit : mm (typ) 3179C Pd max -- Ta 1.0 3 Specified board: 114.376.11.6mm 6.5 Material: Glass epoxy 0.8 20 11 0.6 0.4 0.38 110 0.65 0.22 0.15 0.2 (0.33) 0 --30 --20 0 20 40 60 80 90 100 Ambient temperature, Ta -- C SANYO : SSOP20(225mil) No.A2125-2/5 (1.3) 0.1 4.4 6.4 1.5max 0.5 Allowable power dissipation, Pd max -- W