Ordering number : ENA2182A LV5684NPVD Bi-CMOS IC LV5684NPVD Specifications Absolute Maximum Ratings at Ta = 25C Parameter Symbol Conditions Ratings Unit Supply voltage Vmax V 1, V2 36 V CC CC CC V6IN max V6IN (*) 7 V Input voltage V max CTRL1, CTRL2 7 V IN Allowable power dissipation Pd max Independent IC Ta 25C 1.3 W Al heat sink * 5.3 W With an infinity heat sink 26 W Peak supply voltage V peak See below for the waveform applied. 50 V CC Operating ambient temperature Topr -40 to +85 C Storage temperature Tstg -55 to +150 C Junction temperature Tj max 150 C * : When the Aluminum heat sink (50mm 50mm 1.5mm) is used Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time. Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current, high voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details. Waveform of surge test (V 1, V 2) CC CC *V6IN is designed to tolerant toward short period of over-voltage (max 20V) which is assumed in condition of short 50V circuit between V 1/V 2 and V6IN. CC CC 90% However, applying over-voltage higher than maximum rating (7V) to V6IN may degrade the device reliability 10% 16V 5msec 100msec Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Recommended Operating Conditions at Ta = 25C V 1 CC Parameter Conditions Ratings Unit Operating supply voltage 1 V output 7 to 16 V DD V 2 CC Parameter Conditions Ratings Unit Operating supply voltage 2 ILM output (10V) 12 to 16 V ILM output (8V) 10 to 16 V Operating supply voltage 3 AUDIO output (9V) 10 to 16 V Operating supply voltage 4 CD output (I = 1.3A) 10.5 to 16 V O CD output (I 1A) 10 to 16 V O Operating supply voltage 5 EXT output, ANT output 10 to 16 V V6IN Parameter Conditions Ratings Unit Operating supply voltage 6 V output, SW33V output 5.7 to 6.5 V DD Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. No.A2182-2/15