LV8548MCSLDGEVK ON Semiconductor

LV8548MCSLDGEVB Brush DC Motor Driver Module Solution Kit Quick Start Guide Overview The LV8548MCSLDGEVB is an ON Semiconductor motor driver module featuring the LV8548MC. This module is capable of easily driving 2 brushed DC motors. 1) Motor driving is made easy with Arduino Micro compatibility. The www.onsemi.com LV8548MCSLDGEVB comes with a Baseboard for facilitated plug-and-play connectivity with an Arduino Micro. GUI and Open-source API Functions are available for custom, user-specific motor driving programs. Features: 2) VCC = 20 V, IO =1.0 A Through OUT A-B and OUT C-D max max 612 V System Applications Recommended VCC = 416V Max Standby current consumption = 0 Pulse Width Modulation (PWM) control, adjustable motor torque and LV8548MCSLDGEVB Board speed Forward rotation, reverse rotation, and built in brake function Typical Applications: In-Home Appliances, Consumer Products, Industrial Products For further product information, please visit: LV8548MCSLDGEVB for Brush DC motor Contents of the Kit Hardware LV8548MCSLDGEVB Motor driver module ONBB4AMGEVBBaseboard Arduino Micro USB Cable (Micro B-A) USB Thumb Drive Flat-tip Screw Driver Brush DC Motor - RC-260RA-18130 (MABUCHI motor) 1pc (Stepper motor 1pc) Software(Included in USB Thumb Drive) Arduino IDE Installer Installer package in Japanese GUI Related Files GUI as well as .NET Framework4.6.1 Installer .NET Framework Related Files Stepper Motor Files Refer to Stepper Motor Manual API Library GUI Arduino Firmware Instructions for operation and setup (This document) Appendix for supplementary material Software Setup The IDE will display the following message when Please download the LV8548 DC Program.ino file is opened for the first time. Click OK to continue. found on the provided USB flash drive to any preferred directory. (E.g. Libraries Documents or Desktop) This message will be displayed if the .ino file is not inside of a folder with the same name. (E.g. Sketch12345.ino must be in the Sketch12345 folder). API Library Following process should be operated with the Arduino Micro disconnected. Double click on the Arduino sketch . This will launch the Arduino IDE. (Check the Appendix if the Arduino IDE is not installed) www.onsemi.com 2